Does INNO Roof Rack for 2015 Toyota RAV4 Include Locks

Question

Question:

Roof Rack for 2015 RAV4 1 When I click on more info.. for Part Numbers: INB137,INSUT,INK646 a photo is included that shows locks but the description for the product indicates non-locking. Please clarify. If not included, can locks be purchased separately? 2 This product has a Crossbar Spread of 28 inches. An almost identical product, Part Numbers: INB137,INSUT,INK329, has a Crossbar Spread of 29 inches. Is the Crossbar Spread the min distance between rails can be positioned?

asked by: Gino R

0

Expert Reply:

The INNO roof rack you referenced part numbers # INB137, # INSUT, and # INK646 is a confirmed fit for your 2015 Toyota RAV4 with a naked roof and it does come with locks built into the knobs of the feet that secure the bars to your vehicle roof.

The crossbar spread is the distance measured on center that the bar will be on your roof when the system is installed. With this style of roof rack the bars have to be set in one position and can't be moved forward or backwards.

expert reply by: Jameson C

0

Answer 1

Yes, the Yakima Skybox 21 (old or new, regardless of color) will fit the factory roof rack on your 2015 Toyota RAV4. The box should look similar to #Y07337. Please consult the vehicle owners manual and/or Toyota for the roof and roof rack weight…

view full answer...

Answer 2

I have some great crossbars for your 2017 Toyota RAV4! If you have raised rails that run front to back, I recommend the Malone AirFlow2 Roof Rack, part #MPG216. It's an all-in-one system that attaches to the rails and gives you aero-style…

view full answer...

Answer 3

We do have confirmed fits for trailer hitches and roof racks for the 2019 Toyota RAV4 that you have. For the hitch I recommend the 2 inch Curt Class III part #C13416 because it will install very easily, and has a hidden crosstube which means only the…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The Malone Universal Crossbar System #MPG201 is a more economical choice but it still does a good job. The design and quality of Thule's system is why they have such a large difference in price. Whether you go with the Thule Crossroads system…

view full answer...

Answer 6

That's ironic because currently (March 2022) Thule doesn't have a fit listed for the 2022 Subaru Forester Wilderness. With that being said, from our research it looks like the Wilderness models on the newer Subaru vehicles won't affect…

view full answer...

Answer 7

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

Answer 8

The Buyers Products Mud Flaps #337B1018LSP are considered a universal fit and so long as you have enough room to mount them, they will fit on your 2019 Chevy Blazer. The mud flaps are 10" wide x 18" tall x 1/4" thick so you would need…

view full answer...

Answer 9

For your 2015 Ford Fusion I do recommend the Inno roof rack because it's a great value. It will perform just as well as other options, but at a lesser cost. The correct fit for your '15 Fusion is the following: - Inno Aero Crossbars…

view full answer...

Answer 10

For your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part #Y00409, #Y28TR, #Y03536, #Y06125, #Y06128. This is a 58 inch bar setup and…

view full answer...

Answer 11

Congrats on the new car and thanks for the picture! The Lockrack Adjustable XL Watersport Carrier item #LR54FR fits most aero crossbars on the market including factory ones. Looking at yours I would say this carrier and its clamps will work great…

view full answer...

Answer 12

We have a customer who was able to install the Draw Tite hitch part #DT54YR on their 2023 BMW X1 with the M Sport package but they did say it required some modifications: I had to trim the fascia, rear plastic sensor housing, heat shield. The fascia…

view full answer...