Does Edge Insight CS2 Performance Chip Display Speed When Installed

Question

Question:

I know that the Edge CTS2 can display multiple gauges, can it display a spedometer gauge? Not interested in recalibrating the spedometer, just need to know if that is one of the gauges it can display. Thanks!

asked by: Braden

0

Expert Reply:

The Edge Insight CS2 Comprehensive Gauge Display, part # EP84030 can display up to 8 parameters at one time, depending on your vehicle and how you set it up.

Spedometer (MPH) is one of the parameters that the Edge Insight will display.

expert reply by: Jeffrey L

0

Answer 1

Yes, the Edge Insight CS2 part #EP84030 has been confirmed as a fit for your 1996 Dodge Ram. Plug this monitor into your vehicle's OBD-II port to get parameters (PIDs), diagnostic trouble codes (DTCs), MPG stats, and engine performance tests.

view full answer...

Answer 2

I reached out to my tech contact at Edge and they confirmed with their Master Tech to ensure you got the correct answer. The Edge Insight CS2 Comprehensive Gauge Display #EP84030 will only allow you those functions only when paired with sensors. For…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The Custom Underbed Installation Kit for B&W Companion 5th Wheel Trailer Hitches item #BW83FR and item #BW73FR are identical kits that both fit the 2023 Ford F-350 with either the 6-3/4' or 8' bed lengths. It looks like item #BW83FR was…

view full answer...

Answer 6

That's great information - I appreciate it! The Gen-Y Executive needs at least 1,600 lbs tongue weight to be able to use the lightest option. When using a 5th wheel or gooseneck setup you want your tongue weight to be 20% of the weight of the…

view full answer...

Answer 7

The Rota-Flex Lockout Kit for Blue Ox 5th Wheel Hitches #BLU62XR is just a lockout kit to prevent the Rota-Flex head from pivoting, making it a standard pin box again so you shouldn't have a problem using it with your Andersen Hitch.

view full answer...

Answer 8

I recommend going with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL89DQ for hauling around an in-bed camper with your 2024 Ford F-350 Super Duty. I really like this kit because it has the higher 7,500 lb rating (which you don't…

view full answer...

Answer 9

There are a couple of options that'll work great with your Lippert Turning Point Pin Box, however one hitch stands out to me more than others. Take a look at the: -Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs #C16115 This 5th…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 11

Both Firestone Ride-Rite kits are good options for your 2024 Ford F-250 Super Duty 4WD, but I like to recommend the 7,500 lb #F95FV rating over the 5,000 lb Rating #F35FV simply because it means the air bags can be used for the same application but…

view full answer...

Answer 12

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Does Edge Insight CS2 Performance Chip Display Speed When Installed

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching