Edge Insight Monitor Recommendation for a 1996 Dodge Ram

Question

Question:

Will it work on 1996dodge ram

asked by: Kolton

0

Expert Reply:

Yes, the Edge Insight CS2 part # EP84030 has been confirmed as a fit for your 1996 Dodge Ram.

Plug this monitor into your vehicle's OBD-II port to get parameters (PIDs), diagnostic trouble codes (DTCs), MPG stats, and engine performance tests.

expert reply by: Jameson C

0

Answer 1

The Edge Insight CS2 Comprehensive Gauge Display, part #EP84030 can display up to 8 parameters at one time, depending on your vehicle and how you set it up. Spedometer (MPH) is one of the parameters that the Edge Insight will display.

view full answer...

Answer 2

We do have tuners that come with monitors, but there are no monitors that can be used with the Edge EZ for Dodge Cummins 5.9L, 24V #EP30200. If you want a tuner that has a monitor compatible with your 2000 Dodge Ram you would need to go with the Edge…

view full answer...

Answer 3

Your slide-in truck camper does not have electric brakes so the blue brake circuit wire from its 7-way connector is not used. All other lighting functions as well as 12V auxiliary power will be maintained on the other circuits. Please refer to the…

view full answer...

Answer 4

Hello Paul thanks for your question. When installing the Thule Hullavator Pro #TH898 it is completely normal to have 4 leftover bolts. The length of the bolt you use is determined by what kind of crossbar you are using. The 35mm bolts are intended…

view full answer...

Answer 5

For the Edge CS2 Evolution Diesel Tuner you will need to enter the programming menu. You will turn on your vehicle without starting it. Then use the Menu button to open the main menu and scroll down with the arrow to the Programming on the screen.…

view full answer...

Answer 6

We do not have a CTSV2 that will work on the gas engine option. However the Edge Gas Evolution CTS3 Performance Tuner part #EP39YR will work out for your application.

view full answer...

Answer 7

No, Erich I am really sorry but we do not. I checked with our vendors and Curt, Torklift, and Draw-Tite do not have anything available either. Additionally, I went back a few years and saw that we have never had a custom fit from mount hitch…

view full answer...

Answer 8

The Edge Insight CS2 #EP84030 is a fairly easy install. The most difficult part is routing the wire from the OBD-II port under your vehicle up to your windshield. After that you will just need to attach the window mount to the window and then install…

view full answer...

Answer 9

The 2004 and 2012 Ford F-350s both use the same Edge InSight monitors, #EP84130 or #EP84030, and they both plug into the OBD II port on either truck and the OBD II ports are the same on both trucks. But if you are missing the cable then you would…

view full answer...

Answer 10

If you're flat towing your 2022 GMC Canyon then you'll want to ensure that your tow bar is level between the Canyon and the motorhome. You'll have a 3" "safe zone" from level with a motorhome-mounted tow bar (pictured…

view full answer...

Edge Insight Monitor Recommendation for a 1996 Dodge Ram

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching