2016 F150 SuperCrew 2.7 EcoBoost 5.5ft bed Front Hitch Recommendation

Question

Question:

Does this front hitch fit on a 2016 F150 SuperCrew 2.7 EcoBoost 5.5ft bed? I ask because I have called two different truck shops locally and neither can give me a straight answer. They said it may not fit a 2016 super crew because of some change due to crash safety in the front bumper area. Also they mentioned because of the ecoboost intercooler it may cause an issue. Thanks!

asked by: J.P.

0

Expert Reply:

Draw Tite has listed the fit of their front hitch part # 65067 for all models of the 2016 Ford F-150 so it would work well for your 2016 Ford F-150 with Ecoboost.

expert reply by: Jameson C

0

Answer 1

I suggest the Draw-Tite Front Mount hitch, #65067 that installs through a cut out in the plastic air dam of the F-150. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. Trimming the lower air dam…

view full answer...

Answer 2

The Curt Front Mount Trailer Hitch #C31083 and the Draw-Tite #65067 are extremely similar hitches that are both confirmed to fit your 2018 Ford F-150. Both hitches will mount to the same locations on the truck's frame and feature identical 500…

view full answer...

Answer 3

The front hitch I recommend for your 2015 Ford F-150 Is the Draw-Tite Hitch, part #65067. This hitch can be used for hitch accessories like winches, spare tire carriers, or a snowplow. This has a 2 inch receiver opening and has a line pull capacity…

view full answer...

Answer 4

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 5

M12-1.5 and 1/2"-20 threads are not going to be interchangeable. The diameter of an M12 thread is only going to be 0.4724" while 1/2" threads are going to be 0.500" in diameter. We currently only have 1/2"-20 Lug Nuts…

view full answer...

Answer 6

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 7

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 8

We have a really great kit that comes with everything you'd need to convert your 2021 Vanleigh Pinecrest 335RLP from tandem 6k drum brakes to electric over hydraulic disc brakes with the HydraStar Disc Brake Kit w/ Actuator for Triple Axle…

view full answer...

Answer 9

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 10

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...

Answer 11

I spoke with Lippert and they said the Kwikee 35 Series Electric RV 1-Step part #LC3691461 will be a direct replacement for the Coach Steps 725-0041. It will be a bolt-on install for the most part for the exception of changing out the door switch…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

2016 F150 SuperCrew 2.7 EcoBoost 5.5ft bed Front Hitch Recommendation

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching