Recommended Idler Hub With 6 On 5-1/2 Bolt Pattern For Timbren Axe-Less Suspension
Question:
I need a non braking 6x5.5inch hub for this axle. Can you give me the part# or a link? Thanks
asked by: Steve
Expert Reply:
If you have the Timbren Heavy-Duty Axle-Less Trailer Suspension, part # ASR2KHDS02 for your trailer, we have just what you are looking for.
I recommend the Trailer Idler Hub Assembly, part # AKIHUB-655-35-K. This is an idler hub with a 6 on 5-1/2 bolt pattern. This hub includes bearing and race, outer bearing and race, grease seal, grease cap, and lug nuts. This hub will work with wheels from 14 inch to 17-1/2 inch diameter.
Products Referenced in This Question
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 4 Bolt - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will the Trailer Hub AKIHUB-655-35-K Fit a 3,500 lb Dexter Axle
- Search Results: asr35hds05
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Drop - 5 Bolt Flange - 3,500 lbs
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheels - Qty 1
- Shop: Trailer Valet JXS Drill Powered Swivel Trailer Jack w/ Footplate - Sidewind - 14" Lift - 5K
- Shop: Single Axle Trailer Fender for Enclosed Trailers - Steel - 15" to 16" Wheel - Qty 1
- Shop: Timbren Axle-Less Trailer Suspension - Heavy Duty - Long Spindle w/ No Drop - 5 Bolt - 3.5K
- Shop: Trailer Hitch
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Article: Trailer Tire Sizing
- Search Results: trailer jack
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Shop: Trailer Wiring
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Wiring Diagrams
- Search Results: lug nuts
- Q&A: Dimensions for the MORryde ALLTREK 4000 Suspension Kit
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Suspension Enhancement
- Search Results: lug nut
- Article: Most Popular Wheel Bearings
- Search Results: jack
- Q&A: Can 12 Inch Trailer Tires and Wheels be Replaced with 13 Inch
- Shop: Brake Controller
- Search Results: spare tire carrier
- Q&A: Breaking In Replacement 6,000 lbs Leaf Springs
- Article: How to Accurately Measure Trailer Leaf Springs