Replacement Ball Only for 2015 Ford F-350 with Factory Gooseneck Trailer Hitch

Question

Question:

Where can I buy just the ball,mine was stolen.

asked by: Perry W

0

Expert Reply:

For your 2015 Ford F-350 that came with the factory gooseneck hitch you can use replacement ball # RP19311 or # C60601. Either ball will fit.

expert reply by: Michael H

0

Answer 1

For the factory prep package on your 2015 Ford F350, you have a few different options. The Reese #RP30137, the Curt #C60692, or the B&W #BWGNXA2061. They all install in a similar way but have different locking systems. All will be compatible with…

view full answer...

Answer 2

Please review the measurements of your vehichle against the Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails (Qty 2) #58199. As some of our customers have stated that these will work for the Ford factory puck systems.…

view full answer...

Answer 3

I recommend using the B&W Ball and Safety Chain Kit #BWGNXA2061 for the factory puck system on your 2020 Ford F-350 Super Duty. I like this kit of the Curt #C60692 and Reese #RP30137 options because it uses a handle to secure the gooseneck hitch…

view full answer...

Answer 4

We do have the covers for the pucks as well as the gooseneck hole for the Ford puck system. You will need the following: - Two of the Replacement Puck Plug Covers #58199 - Rubber Hole Cover #RP30136

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Yes, it will! The 5" Offset Gen-Y Hitch Gooseneck Trailer Hitch item #GY43XR is specially designed to work with the Ford factory puck system. It will push the connection point for the gooseball and your cattle trailer back 5" towards your…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Replacement Ball Only for 2015 Ford F-350 with Factory Gooseneck Trailer Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching