Recommended No-Drill Mounting Brackets For 4-Way Connector On Round Trailer Hitch

Question

Question:

Hello I am looking for a No-Drill Mount Bracket to use on a round tube hitch to mount a 4 pole flat connector. Does E-trailer have something that will work for this installation?

asked by: Rick M

0

Expert Reply:

We have just what you are looking for.

The mounting bracket I recommend is part # 18140. This uses a hose clamp that is placed around your trailer hitch so you do not have to do any drilling.

expert reply by: Jeffrey L

0

Answer 1

We carry the same part, but the part number is a bit different. The 6 and 7-Way Trailer Connector Mounting Box for Round Tube Hitches is listed on our website as part #18159.

view full answer...

Answer 2

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 3

Yes, when installing the knob for the Redarc Tow-Pro Liberty Brake Controller item #RED24FR you will want to remove any extra material behind the insert. I am happy the video was able to help you out. I have linked a couple of pictures from the video…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

I did some looking around and it doesn't actually look like there is a hitch that will work with your 2016 Mercedes-Benz C63 AMG. The hitch #C11485 you're looking at is only going to work with the C300 and will not work with your C63. The…

view full answer...

Answer 7

I have linked the installation instruction below for the etrailer Trailer Hitch Receiver #e38KR. You will find the torque settings for the bolts on step 3 for attaching it to your 2023 Hyundai Tucson. We do not post these on our site incase the…

view full answer...

Answer 8

You will easily be able to attach your factory 4-way on your 2024 Toyota Sienna using the Mounting Brackets #18140 and #18144 when you install the etrailer Trailer Hitch Receiver #e56RR. We do have a short Extension #HM48145 if your factory 4-way end…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Thank you for reaching out, it sounds like you have everything in place on your Equinox and just need the motorhome side. The Roadmaster 2nd Motorhome Monitor/Alarm Kit #RM-98850 would take care of that if you are wanting it to operate the same as if…

view full answer...

Answer 11

To order the exact hardware originally included with hitch #13183 use part #RHK. Just choose Curt from the drop down and enter the hitch's part number and the hardware will be the original hardware. I've also linked an install video and the…

view full answer...

Answer 12

We have a Curt trailer hitch that fits your 2000 Nissan Xterra but it is not the one you referenced. You would want the part #13183 which is a confirmed fit instead. It fits with the 17 inch diameter rim spares. For a 4-way trailer wiring harness you…

view full answer...

Recommended No-Drill Mounting Brackets For 4-Way Connector On Round Trailer Hitch

Product Page this Question was Asked From

Continue Researching