Dimensions of the 7-Way Mounting Flange on the Curt Fifth Wheel Wiring Harness # C56070

Question

Question:

How wide is the flange on the receptacle outside to outside? I want to know if its going to fit between the ribs I have in my truck bed. Thank you.

asked by: Roman M

0

Expert Reply:

The overall dimensions of the 7-way socket on the Curt Fifth Wheel Wiring Harness # C56070 is 2-7/8 inch by 2-7/8 inch like the standard size for 7-ways.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, you can use the same 5th wheel hitch but you will need a different installation kit for the new truck. For your new 2013 Dodge Ram 3500 long bed you can use Curt installation kit #C16430-204. This installation kit will accept the Husky 5th…

view full answer...

Answer 2

To give you an in-bed 7-way connection while still maintaining the factory 7-way on your 2012 Ram 3500 Longhorn you can install the Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector #C56070. This wiring harness will simply plug…

view full answer...

Answer 3

In order to install a Curt fifth wheel hitch on a 2015 Ram 3500 you'll need the Curt Custom Fifth Wheel Installation Kit for Dodge Ram part #C16430-204. I don't recommend using any sort of universal kits as they require drilling into…

view full answer...

Answer 4

The Curt 5th Wheel/Gooseneck Custom Wiring Harness part #C56070 is what I recommend for a 2022 Ram 3500. This will tee in behind the factory trailer connector at the bumper and provide a seven way connection in the truck bed for fifth wheel and…

view full answer...

Answer 5

I have attached a drawing from the installation instructions for the rail kit part #C16430-204 you can check out. As you can see in the attached drawing I noted the carriage bolts and where they are located on the rails when installing. Please note…

view full answer...

Answer 6

Fifth-wheel base rails and their corresponding mounting brackets like the Curt Installation Kit #C16430-204 for your 2019 Ram 3500 don't actually have a listed weight capacity, as they are made to match the capacity of any 5th wheel hitch that…

view full answer...

Answer 7

Yes, the 5th wheel/gooseneck 7-way kit part #C56070 can install on the left or right hand side of the truck bed of your 2022 Ram 1500.

view full answer...

Answer 8

The Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs #F2706 that fit your 2018 Ram 2500 will not break when you are towing your 5th wheel trailer, assuming proper installation. The reason I bring that up is Firestone was actually at our…

view full answer...

Answer 9

For your 2017 Ram 2500 the Firestone Ride Rite kit you'd need is the part #F2706. I don't know what air bags you currently have but typically they don't carry over to other vehicles and by the time you piece together everything needed…

view full answer...

Answer 10

For your 2019 Ram 2500 I highly recommend the Firestone Ride-Rite Red Label Air Helper Springs #F2706. These air springs are confirmed to fit the rear axle of your Ram and are compatible with the frame brackets from 5th wheel hitch base rails. These…

view full answer...

Answer 11

The B&W Patriot 5th Wheel Trailer Hitch w/ Slider #BWRVK3270 would be a great option for your 2023 GMC Sierra 2500. If you don't already have base rails then you'll want the Curt Custom Fifth Wheel Installation Kit #C16429-204. As for…

view full answer...

Answer 12

The B&W Custom Installation Kit part #BWRVK2602 is a confirmed fit for a 2021 Ram 2500 (All Except RamBox) and what I recommend using. It installs into pre-drilled holes in the frame so there are no modifications to the frame necessary. This can…

view full answer...

Dimensions of the 7-Way Mounting Flange on the Curt Fifth Wheel Wiring Harness # C56070

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching