Shorter Wheel Stud Recommendation for a Trailer Hub 8-247-50UC3
Question:
The wheel studs are too long for my wheels. I wont be able to use a standard lug wrench to remove. They need to be about 1/2 inch shorter. what wheel stud part number would work for this drum?
asked by: Jim C
0
Expert Reply:
The wheel studs of the hub part # 8-247-50UC3 are 1/2 inch diameter x 2-1/4 inches long. For studs that are around 1/2 inch shorter than that you would want the # K12WB169 which is 1/2 inch diameter and 1.70 inches long.
expert reply by:
Jameson C
0
Products Referenced in This Question
Kodiak Wheel Bolt - 1/2" Diameter x 1-11/16" Long
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 1-11/16 Inch Long
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Most Popular Wheel Bearings
- Q&A: Compatibility of Trailer Valet with Drill Attachment for 2,000 lb Trailer
- Q&A: Preferred Method For Bolting On A Demco Hydraulic Brake Actuator DM72VR
- Q&A: Recommended Replacement Hydraulic Brakes with 10-Inch Diameter for a Boat Trailer?
- Q&A: Does The Demco Actuator DM72VR Require Two Or Three Bolts For Installation?
- Q&A: Changing from 10 x 1-3/4
- Q&A: New Hubs Do not Fit Over Brake Shoes On Trailer
- Q&A: Replacement Hub and Drum Assemblies for AL/KO 8460 Hubs and Drums
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub