Weight of Rola Dart 23x60 Cargo Carrier # 59550

Question

Question:

Weight of product: 23x56 Rola Dart Cargo Carrier for 2inch Hitches - Steel - Folding - 450 lbs Thank you.

asked by: Rob

1

Helpful Expert Reply:

The Curt # C18151 folding cargo carrier has a shipping weight of 55 lbs. Minus the packaging, the carrier weighs right at 80lbs. An optional taillight kit is available as part # 98174LED.

If you were looking for something more lightweight, Curt offers a 19x60 Folding Aluminum Cargo Carrier, part # C18100 that weighs just under 30 lbs.

Both cargo carriers are compatible with Class III hitches that have a 2 inch receiver opening.

expert reply by: Mike L

1

Answer 1

I spoke with my contact over at Curt and he said that front mount receiver #C31071 will fit your 2015 GMC Sierra 2500 Denali. The air dam may need to be trimmed for the hitch to fit. We haven't had anyone complain about the ground clearance but…

view full answer...

Answer 2

There is a front mounted hitch that fits your 2018 GMC Sierra 2500, the Curt #C31071. It has a 2" receiver opening, a line pull rating of 9,000 lbs and a vertical load limit of 500 lbs. I've left a link to a video install of this hitch for…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

There is a suggested and common method for 6 function trailer wiring. You will have the following functions: Right Turn, Left Turn, Ground, Tail/marker, Brake, Battery. I have included a help article on trailer wiring that includes a diagram and…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 8

We still recommend the use of a slider in all standard/short bed trucks. That being said, the new GM trucks like your 2022 GMC Sierra 2500 do have a slightly longer bed than the typical standard bed. The best thing you can do is to measure to see if…

view full answer...

Answer 9

You can replace the Lippert Rhino pin box on your Brinkley 5th wheel. The right one though is going to depend on the pin weight of your trailer. Here are the options that will work to replace the Lippert Rhino: - Pin Weight of 1,500 lbs - 3,500 lbs:…

view full answer...