Installing Softride SR25219 Anti Rattle Threaded Hitch Pin and Lock

Question

Question:

Do I tighten the pin all the way before putting on the lock? I lost the directions.

asked by: STEWART

1

Helpful Expert Reply:

To install the Softride # SR25219 anti-rattle hitch lock, you'd run the bolt down all the way. This pulls the shank of the bike rack tightly up against the inside of the receiver tube, preventing the bike rack from moving around in the receiver tube. When the bolt is tightened, you can then install the lock.

If you click the provided link, you can see a product demonstration video showing how the lock works.

expert reply by: Mike L

1

Answer 1

You can use the Softride Locking, Anti-Rattle Hitch Pin, #SR25219, as long as the shank of your Yakima bike rack is hollow. The block will insert into the shank of the bike rack and the threaded pin will thread through and lock. If your Yakima bike…

view full answer...

Answer 2

I believe you're looking for a more secure hitch pin solution, in which I have just what you need! Check out the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush #e98882 This is a locking hitch pin that will lock through…

view full answer...

Answer 3

Because the shank of your bike rack has been crossthreaded, I recommend drilling both sides out and then using the Softride Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches #SR25219 to give you the correct fit and…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 12

From my research on the Harbor Freight 4x8 folding trailer uses 4.80-12 tires on a 12 inch wheel for the 1195 lb capacity trailer and a 5.30-12 for the 1720 lbs capacity trailer. It is a good idea to check your existing tires to see which size they…

view full answer...

Installing Softride SR25219 Anti Rattle Threaded Hitch Pin and Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching