Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota Highlander

Question

Question:

Hi I currently drive a 1996 Ford Escort Wagon I use the FatCat EVO and Kayak Stacker on Yakima round cross bars and towers. If I buy a 2005 Honda CRV with no factory roof rack, what parts of my existing rack system can I reuse, and what new parts must I buy? If I buy a 2005 Honda CRV with a factory roof rack that consists of 2 cross bars going the width of the car, what parts of my existing rack system can I reuse, and what new parts must I buy? If I buy a 2005 Toyota Highlander which has a factory roof rack with 2 side rails, what parts of my existing rack system can I reuse, and what new parts must I buy?

asked by: Karen P

0

Expert Reply:

As long as the crossbars are in good condition, you can reuse the Round 48 Inch Crossbars for Yakima Roof Rack Systems # Y00408 on the 2005 Honda CR-V with naked roof. Yakima recommend the 58 Inch Round CrossBars for the 2005 Toyota Highlander, so I cannot guarantee that the 48 inch bars will fit correctly. Since you want to continue using the round crossbars, your FatCat EVO # Y03096 and Kayak Stacker # Y04036 will still fit to your roof rack for these 2 vehicles.

To add the Yakima Round Bars to the 2005 CR-V with naked roof, you will want the SkyLine Towers # Y53TR, RoundBar SL Adapter # Y03536, and the LandingPad 8 # Y00228. This system will attached to OEM fixed mounting points on the vehicle's roof.

Yakima does not offer a roof rack fit for the 2005 Honda CR-V with factory roof rack. If your Big PowderHound and Kayak Stacker use the round bar mounts, these will not fit to the factory crossbars on the CR-V. The Big PowderHound can use the Yakima Universal MightyMounts # Y03590 to mount to the factory crossbars. The Kayak Stacker does not have an adapter to allow it to mount to the factory crossbars.

To add Yakima Round Bars to the 2005 Toyota Highlander, you will want to add the TimberLine Towers # Y33TR and the RoundBarl SL Adapter # Y03536. The 58 Inch CrossBars are part # Y00409.

expert reply by: Victoria B

0

Answer 1

You will want to make sure you get a roof rack that is designed for your 2005 CR-V. When traveling you want the equipment you use to be dependable. For a roof rack I recommend the Rhino-Rack RVP Series Roof Rack, part #RRRVP01. This roof rack has…

view full answer...

Answer 2

The Rhino Rack part #RRRVP01 is a confirmed fit for your 2005 Honda CR-V. It installs by attaching to the fixed mounting points of the roof. To put it on is very easy. You just have to thread the bolts through the bolt hole in the roof. Price is…

view full answer...

Answer 3

There is a way to attach a roof rack to your 2005 Honda CR-V with a naked roof, and the correct fit for your CR-V is the following: - Rhino-Rack RVP Roof Rack #RRRVP01

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 10

There are not any set numbers for how much of a dip you may see in your miles per gallon with the Thule Pulse Large Rooftop Cargo Box #TH615 on your 2021 Toyota 4Runner. There have been some test done and most indicate that you will see around a 15%…

view full answer...

Can Parts of Yakima Round Bar Roof Rack Be Reused on 2005 Honda CR-V or Toyota Highlander

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching