What Fan Motor Comes in the Ventline Vanair Trailer Roof Vent # VP-543SP

Question

Question:

2010 Airstream, Flying Cloud, 20’, purchased new. This is going to be the second time I had to replace the Ventline VP-543SP that is located in the bathroom for when taking a shower. I downloaded a PDF for this exact model and it shows the motor changing 3 times. The motor they are showing is now: BVD0218-00 previous motors were VA0164-00 and VC0468-00. My question is the fan coming with the updated motor, because highly doubt the Dexter is sending replacement motors and fan blade assemblies to their retailers and expecting them to change them out. Please advise.

asked by: Kevin

1

Helpful Expert Reply:

The Replacement 12-Volt DC Fan Motor # BVD0218-00 that you mentioned has been around and in the Ventline Vanair Trailer Roof Vent # VP-543SP for a long enough time that there wouldn't be any chance of you getting an older style motor in this vent if you ordered it.

Also, if the motor is the problem in your vent you could just replace it with the # BVD0218-00.

expert reply by: Jameson C

1

Answer 1

My contact at Lippert confirmed with me that the replacement step for LCI model 168367 will be the Lippert Kwikee 27 Series Electric Step, #LC375632. The Lippert Kwikee step features an automatic shut-down is step interacts with an obstacle. The step…

view full answer...

Answer 2

The replacement handle for the VanAir Vent part #VP-543SP that you referenced is the part #BVA0207-05. I attached a diagram that points out where the components of the replacement handle are in relation to the vent. Looks like you would need to pull…

view full answer...

Answer 3

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 4

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 5

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 6

The Blue Ox systems cannot be moved back that far but we do have the perfect system for you. Take a look at the Reese SC weight distribution systems linked to the right (minus the ones that say Light Duty). These systems have narrow brackets that can…

view full answer...

Answer 7

Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…

view full answer...

Answer 8

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Answer 9

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...

Answer 10

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Answer 11

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 12

I added a photo which shows the location of the heating element of the Atwood Water Heater GC6AA-10E for you. It is item number 17 in the diagram. Atwood does recommend having a professional do the job if you are replacing it due to its location.

view full answer...

What Fan Motor Comes in the Ventline Vanair Trailer Roof Vent # VP-543SP

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching