How to Replace Sportback Roof Rack Lock Cylinder

Question

Question:

the lock cylinder on my Sportback SR1002 says 005 on it and is busted so I need a new one. Will any of the Thule lock cylinders fit in it? How can I get the old busted one out? The keys I have also say 005. Will I need a whole new key and lock system. Any help would be greatly appreciated.

asked by: Gregory

0

Expert Reply:

Good news, I can help you get that cylinder replaced.

We have a cylinder that will replace the set that matches your keys # THLOCKN005.

To get the old lock core out you will need a key like # 853-1251, you would have gotten one with the original rack, but if you do not have it anymore this one will work for you. If the core is heavily damaged you may have to take it to a lock smith to see if they can remove it.

I've included a video of how to use this removal key for your convenience.

expert reply by: Jackie C

0

Answer 1

You will need the Universal Change Key for Thule One Key Locks #853-1251. This process does require that your current/old core will need to be unlocked to be able to swap it out for a new one. I have linked a video that will describe in detail how…

view full answer...

Answer 2

Because of the drilling, you'll likely want to replace the full housing with part #SR03807, which will provide you with two locks, lock assemblies, and keys to replace the existing locks and keys.

view full answer...

Answer 3

We have exactly what you need. To replace the 2982 key for your Sears X-Cargo Sport Cargo Box, you just need the Replacement Key #THKEYN2982. This will work perfectly with the existing lock core on your box. It comes with 1 key, so I recommend…

view full answer...

Answer 4

We do have the exact key you need for your Sportrack lock core 013, which is the Replacement Key for Sportrack Racks and Carriers #THKEYY013. I recommend ordering a couple just in case you ever find yourself in need of a spare.

view full answer...

Answer 5

If you drilled the lock core then I'd imagine it is most likely damaged beyond repair at this point. Getting the lock core out now that it's permanently damaged will be difficult. You can continue drilling it till it's totally…

view full answer...

Answer 6

The only way to remove a Thule lock cylinder like the ones in #TH450400 is by inserting the master key into a cylinder in the unlocked position. However, I have a few tips and tricks to help you remove the broken key to allow for the master key to be…

view full answer...

Answer 7

Yes, we do have the replacement key that you need for your Sportrack rack with 013 lock core. - Replacement Key for Sportrack Racks and Carriers #THKEYY013 This includes 1 key. So if you wanted more to have on hand as spares, then you would want to…

view full answer...

Answer 8

For a replacement key for your SportRack roof rack #SR1002 you will need #THKEYN016. The keys are sold in quantities of one. I recommend getting at least 2 so you have a spare.

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...