Can Timbren Axle-Less Trailer Suspension System be Used in Place of Torsion Axles on Travel Trailer

Question

Question:

I have a Trail Cruiser 27foot dual axle Travel Trailer with shot torsion axles wearing out my tires. Do you think these axles would work for my situation? I have over 30,000 miles on the trailer with two 2500# factory axles and a listed 4100# empty weight and a gross of 5100#. I plan to replace with 3500# axles. Thank You

asked by: Michael K

0

Expert Reply:

Yes, you could use the Timbren Axle-Less system # A35RD545 in place of straight axles on your travel trailer. This system basically works similarly to torsion axles with the suspension built in.

Since this system is rated for 3,500 pounds though you would likely notice a stiffer ride since the trailer will not weigh enough to compress the suspension the way it does with the two 2,500 pound axles. I have included a link to all of the Timbren systems we carry.

The system you referenced comes with hubs that have a 5 on 4-1/2 bolt pattern. If you have a different bolt pattern let me know and I can make other recommendations.

expert reply by: Michael H

0

Answer 1

The Timbren Axle-Less Trailer Suspension System #A20RS545 will work well on a boat trailer. It has a heavy-duty steel construction which doesn't make it the best option for a salt water application, but it does have a black powder coat…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13…

view full answer...

Answer 4

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 5

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 8

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Can Timbren Axle-Less Trailer Suspension System be Used in Place of Torsion Axles on Travel Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching