Towing Mirror Recommendation for 2013 Ford Expedition XLT

Question

Question:

What set of slip-on mirrors would fit a 2013 Ford Expedition? It looks like CIPA does not make one for this car? Thanks!

asked by: Tom

0

Expert Reply:

My first choice of a universal mirror would be the Cipa Deluxe Door Mount, part # 11650. If your Expedition does NOT have the applied plastic cladding on the bottom portion of front doors, the 11650 would fit great.

Any portion of the mirror that would come into contact with the vehicle are rubber coated, so scratching would not be a concern.

The K-Source Clip on Towing Mirrors you referenced, part # KS3891 would also be a good choice. The mirror will attach to your existing mirrors as long as the mirror glass is recessed a bit into the mirror housing so the clips that the mirror attaches with have a point on the mirror housing to grab on to. The ratcheting rubber straps will cinch the mirror tightly to your mirror housing.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture of your 1998 Toyota RAV4. Based on seeing it the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors #WM6600-2 that you referenced would easily fit. There isn't anything present on the side of your door that…

view full answer...

Answer 2

After looking at the 1966 Ford F-250, I can see why the curve/trim on the door might give you pause on whether or not these CIPA Universal Deluxe Door-Mirrors #11650-2 might not fit, but I spoke with one of my contacts over at CIPA and he confirmed…

view full answer...

Answer 3

Hi Rene; I'm sure it's frustrating to have the mirror fall off, and while there are only universal towing mirrors for your 2016 Nissan Frontier, there are better ones than the clamp-on (which I also do not like). I would definitely go with…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The Domar Stabilizer Jack, part #TJ01RT, do have a weight capacity of 650 lbs. I spoke with my contact at Domar and they told me that these would be able to handle the 650 lbs at the point they were attached. If you have a lot of weight concentrated…

view full answer...

Answer 8

In order to carry bikes on the back of your motor home while also towing your 2019 Honda Fit you will first need a dual hitch adapter which I have attached a list of options for your below. Roadmaster Dual Hitch Receiver Adapter (4" Rise/Drop) -…

view full answer...

Answer 9

If you are looking for a protective screen or guard for a vehicle being flat towed behind a motorhome we do have such products. Both types of products are displays on the two linked pages. These include products like the Roadmaster Guardian #RM-4000…

view full answer...

Answer 10

I recommend K-Source Universal Towing Mirror part #KS3891 to use on the 2018 Volkswagen Atlas because they are an easy tool free installation option that does not require hardware. They just clip on the factor mirrors with the provided straps as long…

view full answer...

Towing Mirror Recommendation for 2013 Ford Expedition XLT

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching