Will the CIPA Extendable Truck Mirrors Fit on 1966 Ford F-250

Question

Question:

Will this style mirror work on the older 66 Ford F250 that has the curve in the door?

asked by: William E

1

Helpful Expert Reply:

After looking at the 1966 Ford F-250, I can see why the curve/trim on the door might give you pause on whether or not these CIPA Universal Deluxe Door-Mirrors # 11650-2 might not fit, but I spoke with one of my contacts over at CIPA and he confirmed that these will work on your 1966 Ford F-250. These mirrors clamp on between the top of the door panel and the window and have a strap that runs the length of the door panel down to the bottom of the door, so they will not be affected by the trim that runs through the middle of the door panel on the 66 F-250. They also come with mounting pads and a rubber coated hook to avoid scratching up your doors when mounted.

expert reply by: Erik B

1

Answer 1

Thanks for the picture of your 1998 Toyota RAV4. Based on seeing it the Wheel Masters Eagle Vision Universal Extendable Towing Mirrors #WM6600-2 that you referenced would easily fit. There isn't anything present on the side of your door that…

view full answer...

Answer 2

The K-Source tow mirrors #KS3990 would work great on your 2023 Ford Expedition. We had a chance to install them on a similar 2018 Ford Expedition and found they installed easily, worked great, and the highest reviewed option we know fits.

view full answer...

Answer 3

On your trailer you originally had what is called a wishbone harness. This type of harness has the running light circuit split at the connector so one wire will run to the left side, the other to the right side. This is so you do not have to have a…

view full answer...

Answer 4

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

view full answer...

Answer 5

The K-Source Snap & Zap Custom Towing Mirrors #KS80930 I feel are the best mirrors extensions for your 2024 GMC Sierra 1500. These have all the cut outs for turn signals, puddle lights and cameras you may have on your mirrors. The snap on design…

view full answer...

Answer 6

For a replacement I would check the size of what you currently have and match it. AGM is perfectly fine to use and won't require swapping out your converter/inverter since it uses the same charge profile as lead acid. An upgrade is typically…

view full answer...

Answer 7

The longest 2-5/16" hitch ball we have, with a 1" diameter shank, is the B&W item #BWHB94001. The shank is 2-1/2" long and has a 12,000 lbs capacity. This is also our highest capacity option.

view full answer...

Answer 8

I would recommend either the K-Source Universal Clip-On mirror, part #KS3891 or the Cipa Deluxe Door Mount Mirror, part #11650. The mirrors are sold individually, and can be used on either the driver or passenger side of the vehicle. The clip on…

view full answer...

Answer 9

The Wheel Masters Vision Plus Extendable Towing Mirrors part #WM6500 should fit a 1996 Ford F-250. That said, these are universal mirrors so specific testing for an F-250 is not available. You can however confirm this yourself by checking under the…

view full answer...

Will the CIPA Extendable Truck Mirrors Fit on 1966 Ford F-250

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching