Replacement Fender for Single Axle Haulmark Trailer

Question

Question:

I am trying to find a replacement fender for a single axle 2003 Haulmark trailer.

asked by: Hernan C

0

Expert Reply:

I looked up your 2003 Haulmark Trailer and it looks like they typically use the Jeep Style trailer fender.

If you have 12 inch wheels then # HP99VR is a steel fender option that could work for you. It will mount using your existing brackets, but if for some reason you need the brackets we offer # CE26061G-2. If you were looking for an aluminum option we offer one in diamond plate in that size # HP49VR.

I noticed you were looking at the # HP76VR. This fender accommodates 13 inch to 15 inch wheels, and is a weld-on option only. We offer this size in a bracket application that is an aluminum diamond plate # CE18041ATB.

I have linked the page you will need to narrow down and verify which option will work for your tires.
If you could provide me with more information about your trailer, I would be happy to tailor a specific recommendation for you.

expert reply by: Jackie C

0

Answer 1

We have Jeep style trailer fenders but only for up to 15 inch wheels. We don't have any fenders for 17 inch wheels unless you are referring to the overall diameter of the tire versus the wheel/rim. I haven't seen any tear campers with that…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 4

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 5

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 6

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

I am sorry I don't have any tires that are going to fit your rim. I do have a couple of comparable size tires that come in a wheel tire combo. I have listed the two below along with their lug patterns. 5 on 4-1/2 Lug Pattern - Kenda 205/65-10…

view full answer...

Answer 9

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 10

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...

Answer 11

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 12

The 60/40 axle placement formula is a great starting point and does take into account the tongue of the trailer from where the trailer sits on the hitch ball. Please keep in mind that this is a very basic formula or estimate for axle placement. For a…

view full answer...

Replacement Fender for Single Axle Haulmark Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching