bing tracking image
Q & A Icon

What Type of Battery Should be Used with Superwinch LT2000 12V Utility Winch 2,000lb  

Question:

What type of battery do I need to use this in my work shop?? Which one would you recommend??

0

Expert Reply:

To operate a DC powered winch such as # 1120210 that is not installed on a vehicle you will need a 12 volt battery with a high enough amp hour rating for the draw of the winch under load. Superwinch LT2000 Electric Utility Winch # 1120210 draws 100 amps when used at it's capacity of 2,000 lbs. With zero line pull it draws 10 amps. Batteries are expensive so a regular truck battery with a high amp hour rating would work well.

I also recommend using a CTEK battery charger # CTEK56353 to not only charge the battery but also to maintain and recondition it.

If you are interested in an AC powered winch you can plug into an outlet the most cost effective model we carry is # DL25514. A wire rope is included.

expert reply by:
0
Michael H

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.