bing tracking image
Summer Starts Here - Save up to 70%
SAVE NOW
Customer Service My Orders
Q & A Icon

Adding a Brake Controller to a 2008 Honda Ridgeline with 5-Way Trailer Connector  

Question:

My 2008 Honda Ridgeline is pre wired for a brake control under the dash Im switching from a 5 flat to a 7 round, am I still looking for the blue wire

0

Expert Reply:

If your 2008 Honda Ridgeline did not come with a factory 7-Way and you are not having the OEM 7-Way installed by a Honda dealer then what you will do is hardwire in a brake controller using # ETBC7.

If the brake controller harness under the dash is fully functional then what you would do instead is use # 37185 and wiring kit # 5506. You would plug in the brake controller like normal but you would remove the blue wire from the end that plugs into the truck and instead attach it to one end of the wire in the 5006 kit. You would then route the wire through the firewall, under the truck, and attach to the blue wire on the 37185.

Please note that the 5-Way will plug into the 37185 but the 5th wire would attach to the 37185 purple wire.

expert reply by:
0
Michael H
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for ETBC7

Miscellaneous Media

etbc7
Brake Controller 7- and 4-Way Installation Kit (ETBC7)
Trailer Brake Controller Installation - 2008 Honda Odyssey 90885
Trailer Brake Controller Installation - 2008 Honda Odyssey 90885 - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>