Availability of Trailer Bearing L44643 and Race L44610
Question:
I was looking for a bearing set for a mower spindle. The old bearings are Timken L44610/L44643 . These numbers came up on your site, but they are not Timken. My question is, my mower will run much faster than a wheel bearing. Would this bearing hold up to the high speed and is the bearing you have the same size as the Timken? Thanks
asked by: Alan R
Expert Reply:
The numbers you listed are standard bearing numbers. Typically Timken does not use them, but if that is what you have then most likely the bearing part # L44643 and the seal # L44610 would work well for you.
You can measure to verify though. If the inner diameter of the bearing you have is exactly 1.00 inch then it is the same bearing.
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 4 on 4 - Galvanized
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Shop: Trailer Spindle Nut 1"
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - Galvanized
- Shop: 35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
- Search Results: marine grease
- Search Results: 4 on 4 trailer hub
- Search Results: 2 inch ball
- Search Results: wheel bearing grease
- Search Results: 4.80 8 tires
- Search Results: 4 on 4 hub
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Replacement Race for L44643 and L44649 Bearings
- Q&A: Does a Washer go Between the Outside Bearing and the Axle Nut?
- Q&A: Replacement Hubs with 4 on 4 Bolt Pattern for 1" Non-Tapered Spindle on Boat Trailer with 12" Wheels
- Q&A: Hub with 4 Lug Bolt Pattern that Uses Bearing Numbers L44649
- Q&A: Replacement Trailer Hub for Seadoo Trailer 4 on 4 Bolt Pattern
- Search Results: spindle nut
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: Inspecting and Packing Trailer Bearings with Grease Demonstration
- Video: etrailer Trailer Brake Bearing Kit Installation
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Shop: Trailer Wiring
on Trailer Bearings Races Seals Caps
