Will the Urethane Cover of the Skid Wheels part # UF48-979014 Easily Wear Off

Question

Question:

i have 29t nexus viper class b+ rt. at 30foot hitch has 5k, hitch with anti skid brackets triangular shaped worried aboujt neoprene coated will wear off and thenwhat replace versus all steel

asked by: Ed G

0

Expert Reply:

It would take a great deal of abuse to get the 1/4 inch urethane layer of the Skid Wheels part # UF48-979014 that you referenced to wear off.

Unless you are dragging your trailer down the highway (which if so you have bigger problems), you wouldn't need to worry about the coating of the skid wheels to come off.

expert reply by: Jameson C

0

Answer 1

I contacted Diamond and the LED strip part #DG52681 can only be cut into two sections because the 4-pin connectors are not sold separately. When you cut on one of the copper sections of the strip you will be able to slide the 4-pin connector into the…

view full answer...

Answer 2

You're looking at 3-3/8" from the bottom of the wheel to the top of the mounting plate on the Ultra-Fab Hitch Mounted Steel Rollers for RVs w/ 2-1/2" Hitch Tubing #UF48-979017.

view full answer...

Answer 3

I went out into our warehouse and pulled a set of the Ultra-Fab Rotating, Hitch Mounted Skid Wheels #UF48-979014 and found that the distance from the bottom of the wheel to where the bottom plate will be is 5-3/4 inches. Since the bumper you plan to…

view full answer...

Answer 4

For your 30 foot 5th wheel I really like the frame mount skid wheels that can swivel. For that the Ultra Fab kit part #UF48-979011 would be your best option. I attached a picture that shows these attached to a trailer frame as well. These don't…

view full answer...

Answer 5

The distance from the top of the mounting plate to the bottom of the wheel on the Ultra-Fab 4 Inch Skid Wheels, #UF48-979011, is 5-3/4 inches and for the 6 Inch wheels, #UF48-979013, 7-3/4 inches. I have attached a photo for you showing these…

view full answer...

Answer 6

Generally an RV bumper is designed to take lateral force but not the vertical force it would encounter from having skid wheels installed on it. The RV frame at the rear (near the bumper) is the best place to mount skid wheels. If there is a hitch on…

view full answer...

Answer 7

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. You will…

view full answer...

Answer 8

That's a really good question, and the weight ratings for the Equa-Flex Cushioned Equalizers are per axle as opposed to the weight of the trailer; so you will want to choose the kit that meets whatever your axles are rated for: - 3,000 lbs to…

view full answer...

Will the Urethane Cover of the Skid Wheels part # UF48-979014 Easily Wear Off

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching