Availability of 4-Step Set of Stairs for a 5th Wheel Trailer

Question

Question:

Iam look for 4 step alluminum step for 5th wheel

asked by: Glenn

0

Expert Reply:

The only 4-step aluminum steps we carry are scissor steps such as # AS24 but they are not designed for permanent installation on a 5th wheel trailer. For steps that are designed for permanent installation on a 5th wheel trailer you can use Stromberg-Carlson model # SMFP-4400.

expert reply by: Michael H

0

Answer 1

We have a couple of 4-step scissor stairs you could use. We have a steel model, #SS04, and an aluminum model, #AS04, and both are 18 inches wide. These stairs mount using an included bracket that looks like #AS2002. So they do not pin into place.…

view full answer...

Answer 2

The correct TorkLift camper tie downs for your 2006 Silverado 2500HD 8-foot bed with factory hitch, double/extended cab and steps that end at the cab are part #TLC2204 for the front set and #TLC3206 for the rear. Both have the removable arms…

view full answer...

Answer 3

It's possible you could take it to get repaired but it may be cheaper to upgrade your unit. The Jensen RV Stereo #JWM60A is identical to your Jensen AWM968L, and has the same cutout dimensions as your current unit, making this a direct…

view full answer...

Answer 4

For your 2000 Chevrolet Silverado 2500, with 8' bed, factory hitch, and no running board under the bed, you should use the TorkLift #TLC2202 (front) and #TLC3204 (rear) frame mounted camper tie-downs. The powder coated finish will look great for…

view full answer...

Answer 5

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 6

Turnbuckles like theHappiJac Original #LC182898 are more or less universal so you'll be able to use them with the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLT2303.

view full answer...

Answer 7

I spoke with HappiJac about the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898 and they informed me that the max reach is 22" for the front and 33-1/2" for the rear. Please note, the turnbuckles are adjustable so you can…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 10

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Availability of 4-Step Set of Stairs for a 5th Wheel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching