Jounce Bumper Suspension Enhancement Recommendation for a 2015 Toyota Tacoma

Question

Question:

do you folks have any comparable products for the timbren ses hollow rubber shocks?

asked by: Dave

0

Expert Reply:

For your 2015 Toyota Tacoma we offer the SumoSprings like part # SSR-610-40 which are very similar to the Timbren systems that you referenced.

expert reply by: Jameson C

0

Answer 1

If you are looking for suspension support that fits your 2007 Nissan Titan that will give you the best overall ride quality while also giving you the suspension support you are looking for the best option is the SumoSprings part #SSR-610-40. These…

view full answer...

Answer 2

I'd go with the lighter duty SumoSprings for your 2017 Toyota Tundra for the reason you mentioned. The heavier duty ones will be much harsher. I only recommend the higher duty ones for people who plan to be at the capacity of their vehicle most…

view full answer...

Answer 3

I just spoke with my rep at Timbren. The height of the Timbren Suspension Enhancement System - Rear Axle Item #T62FR for your 2010 Toyota Tundra is 3 9/16 inches for the rubber spring portion and 1 5/16 inches for the bracket with a combined overall…

view full answer...

Answer 4

Yes, the SumoSprings part #SSR-610-40 that you referenced have been confirmed as a fit for your 2016 Toyota Tacoma and would do a great job to give you additional rear suspension support when you are hauling heavy loads in the bed of your truck. Note…

view full answer...

Answer 5

I believe you are looking for a footplate for the etrailer Round A-Frame Jack, #TJA-5000S-B. If so, then you can use the Footplate for 2,000-lb and 5,000-lb Round, A-Frame Jacks #JF-99. This foot plate attaches to the inner jack leg using included…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hi there Jaime; thanks for the question and you are right on the money for the Reese weight distribution hitch that will work with your Coleman 17B: - Reese Pro Round Bar Weight Distribution #RE34FR This is rated for tongue weights between 200 lbs…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...