Metric to Standard Brake Line Adapter Recommendation

Question

Question:

Hello, Just a note to ask if you folks have 3/16inch flexible brake lines with metric threads. In particular Id like something in the 3.5 to 4 foot length. Thank you.

asked by: Roger

0

Expert Reply:

We don't have any metric brake lines, but we do have some metric to standard adapters that could work for you. The part # RM7921 will work for a 12 mm brake line and the part # RM-7923 will work if you have a 10 mm thread.

The brake line # BH-3MFS-3-5 that you referenced is 3-1/2 feet long too.

expert reply by: Jameson C

0

Answer 1

The Roadmaster Metric-to-Standard Brake Line Tee #RM-7923 has an overall length of 2-1/8". The threads on the ends of the Tee are 10mm male and female. The female thread that exits from the side of the Tee is a 3/16" flared NPT.

view full answer...

Answer 2

If your motorhome brake line has metric fittings, it will be necessary to use a metric-to-standard T-fitting to attach the proportioning valve. This fitting is not supplied in the RoadMaster BrakeMaster Second RV Kit for Hydraulic Brakes #RM-98300.…

view full answer...

Answer 3

It sounds like you are asking if we have the proportioning valve available by itself separate from the RoadMaster BrakeMaster Second RV Kit for Hydraulic Brakes part #RM-98300 and if that is the case then yes, the RoadMaster Regulator Kit part…

view full answer...

Answer 4

The fittings that are included with the Conversion Regulator Kit for #RM-9060, part #RM-900001, includes standard fittings but not metric fittings or adapters. You would need #RM7921.

view full answer...

Answer 5

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 6

We definitely have some trailer jacks you can use as a replacement for your Dutton-Lainson but it doesn't look like anything we have will work as a direct replacement. If you'd like to stick with the Dutton-Lainson brand then I recommend…

view full answer...

Answer 7

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 8

I spoke to my contact at Kodiak about the issue you are having and he said that sometimes if a trailer braking system is doing way too much of the braking the pressure can get too high for the calipers and they can break (not brake). He said that the…

view full answer...

Answer 9

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 10

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Answer 11

If the two 6 volt batteries were wired in series to produce 12 volts total then a 12 volt battery would easily work as a replacement for them. If the two batteries were wired in parallel and the output voltage is 6 volts then no. I attached a diagram…

view full answer...

Answer 12

Yes, the Kodiak Hydraulic Brake Hose #BH-3MFS-20 that you referenced is the correct brake line to use with your UFP actuator as it has the same fitting size of 3/16 inch.

view full answer...

Metric to Standard Brake Line Adapter Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching