Gearbox Replacement Recommendation for Trailer Landing Gear

Question

Question:

Will this replace my stock plastic gearbox, which the corner is broken off?? This looks just like mine, I can get pics if needed.

asked by: Matt

0

Expert Reply:

The Replacement Aluminum Gearbox for Stromberg Carlson Landing Gear # LG-179015 fits most landing gear sets on trailers. It can work with Atwood, Lippert, and Venture landing gear.

Most likely it will fit yours too since you said is looks just like it. Try and find a brand name on the landing gear and email me back with that and a picture and I will let you know.

expert reply by: Jameson C

0

Answer 1

I have been hearing about this issue a lot lately and it is either the motor or the gear box if not both. The gear boxes and motors are available as replacements for most landing gear systems but to be sure I would need to know the manufacturer and…

view full answer...

Answer 2

The Stromberg Carlson #LG-179015 and the Lippert Components #LC276602 replacement gear boxes are actually identical. The price difference is just because they come from different manufacturers who price them separately.

view full answer...

Answer 3

If you are seeing your Atwood gear box moving around on the shaft of your landing gear that is because one of the tabs that holds it in place has sheered off. We see this problem on occasion and the only solution is to replace the gear box. What I…

view full answer...

Answer 4

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Gearbox Replacement Recommendation for Trailer Landing Gear

Product Page this Question was Asked From

Continue Researching