How To Measure Trailer Wheel For Baby Moon Covers

Question

Question:

Will the 8 7/8 Baby Moon Hub Cover fit an 8inch wheel?

asked by: Kenny S

0

Expert Reply:

The Phoenix USA Baby Moon Hub Cover part # PXQ1401B fits a 221mm hub bore which is 8-7/8" in diameter. Since the baby moon is designed to cover the hub bore then it most likely is not going to fit a smaller 8 inch wheel. You would need to measure the hub bore of the wheel to see what size baby moon you need to fit.

The correct way to measure for baby moons is to take two measurements. You need the measurement from the outer diameter of the inner ring and outer diameter of the inner ring with tab. I have attached a diagram of what that will look like. The inner diameter of the ring with the tab needs to be 8-7/8" diameter to fit PXQ1401B.

expert reply by: Heather A

0

click to enlarge

Answer 1

The measurement that you will want to take is the outer diameter of the inner ring and the outer diameter of the inner ring with one of the tabs (see photo). You will also want to count the bolt holes on the wheel and know the wheel diameter. The…

view full answer...

Answer 2

Yes, the Kenda Karrier ST175/80R13 Radial Trailer Tire #AM31990 will indeed fit on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. The spare tire carrier will work with virtually any 4 lug, 5 lug or 6 lug wheel. The #AM31990 wheel uses the…

view full answer...

Answer 3

The weight is just 19 lbs for the Demco spare tire carrier for trailer tongues; it also comes in your choice of silver or black in color (the weight is the same for each): - Silver: Demco Spare Tire Carrier for up to 4" Trailer Tongue…

view full answer...

Answer 4

The Demco Spare Tire Carrier for up to 4" Trailer Tongue - Silver #DM15851-52 only comes with the trailer installation mounting hardware. The carrier does not come with the hardware to mount your spare tire on the carrier. This includes the…

view full answer...

Answer 5

The Demco Spare Tire Carrier for up to 4" Trailer Tongue part #DM15851-52 doesn't have a weight capacity and it's not common for spare tire carriers to have this either. The bolt pattern compatibility will help limit overloading. For…

view full answer...

Answer 6

Although we do not carry Carlisle tires I was able to find the maximum pressure for the 4.80-8 sport trail tire on their site. If you have a load range B tire the correct psi is 60. If you have a load range C tire the correct psi is 90. I recommend…

view full answer...

Answer 7

The Americana Baby Moon Trailer Wheel Center Cap, part #AM90086, is intended for 13-, 14- and 15-inch conventional 5-lug trailer wheels. Since your VW Trike wheels are 15 inches and have roughly a 9-1/2 inch snap ring around the hub, these 9-1/2-inch…

view full answer...

Answer 8

The limiting factor in a wheel's pressure capacity is usually the valve stem. Some are rated only for 65-psi, #AM20903, while others such as #AM20904 are rated for 80-psi. Part #AM20907 handles up to 100-psi and part #AM20906 is good for tires…

view full answer...

Answer 9

Based on the measurements of your wheel you included it appears you will need the Phoenix USA Baby Moon Hubcap #PX1307SS. This hubcap has an outer diameter of 10-1/2" with an inner diameter of 10-3/8" and a lip that is 10-3/16" across.…

view full answer...

How To Measure Trailer Wheel For Baby Moon Covers

Product Page this Question was Asked From

Continue Researching