bing tracking image
Q & A Icon

Choosing Replacement Trailer Roof Vent for 1972 Road Ranger Camper  

Question:

hello I have a 1972 road ranger camper that I need to replace the roof vents on. how do I measure the vent to make sure of the size. can I go inside and measure the inside of the vent. I did that and it measured 14x14 but not sure where I am suppose to take the measurement at to make sure I get the correct size.

0

Expert Reply:

You don't have to worry about sizing your replacement vents. Most square trailer roof vents like the Ventline # V2092SP-25 are designed to fit a standardized 14-1/4 x 14-1/4-inch rough roof opening as found on the majority of trailers and campers. Since you measured 14 x 14-inches on the inside we know that your rough opening is going to match this 14-1/4-inch square size.

The linked page will show you all complete 14 x 14 vent assemblies that will fit your camper. You can choose between various colors of plastic lids, or metal vents like # V2110SP-24, and either manual or powered operation.

Vents include a garnish (trim) ring and we also offer garnishes in varied leg lengths in case you need one with a different depth; please see the other link.

You will need a vent installation kit, either # 344270KITW for metal or coated metal roofs, or part # CAM25013 for a rubberized roof.

expert reply by:
0
Adam R

Products Referenced in This Question




Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>