Tow Mirror Recommendation for a 2013 Ford F-150

Question

Question:

Looking at tow mirrors K source 81810 . I have 2013 F150 crew cab trim FX4. My mirror heads are painted will the snap over tow mirrors scratch the painted . Thank for your help

asked by: Scott

0

Expert Reply:

The K Source Custom Towing Mirrors # KS81810 has been confirmed as a fit for your 2013 Ford F-150 and would not scratch the paint on the mirrors as long as you keep the painted surface clean. There are pads on the insides of these towing mirrors that will protect the painted surface.

I attached an install video for you to check out as well.

expert reply by: Jameson C

0

Answer 1

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 4

Based on the information I could find the Samsung MR1031UWC is a countertop style microwave that is 20-11/32" wide, 13-11/32" tall and 14-5/8" deep. Currently we only have over the range and built in style microwaves. If your microwave…

view full answer...

Answer 5

Hey Roger, yes you could remove the trim of the High Pointe Built In Microwave part #HP84ZR and it could sit on a counter top like you asked about. The dimensions listed for it are correct for without the trim kit: 19" W x 11.375" H x…

view full answer...

Answer 6

The correct Roadactive kit that fits your 2023 Ford F-150 is the part #RAS3611-YHD. I really like the RAS kits as they basically don't have any downsides. You get the adjustable support, an easy install, no maintenance, and actually improves…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The absolute best towing mirrors for your 2024 Ford F-150 are the K-Source Snap & Zap Custom Towing Mirrors #KS69NQ because they slip on over your OEM mirrors for a great fit that minimizes how much road vibration you see in the mirrors. We had…

view full answer...

Answer 9

I believe you're talking about the Furrion Propane RV Built-in Wall Oven #FSRD22LASS. This is 20-11/16" tall but the width is more than you can fit at 24-3/4" wide. These are the same dimensions as the Furrion Electric RV Built-in Wall…

view full answer...

Answer 10

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Answer 11

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or allow you to…

view full answer...

Answer 12

It does appear you are going to be able to flip the axles on your 2023 Northern Spirit 2145RBX using 2 of the Dexter Trailer Springs Over-Under Conversion Kits #K71-384-00. I will warn you Kalvin this will raise the height of your camper roughly…

view full answer...