Replacing Factory 7-Way with a 7- and 4-Way Connector on a 2014 Toyota 4Runnner

Question

Question:

Hi im looking for oem replacement or equivelant towing harness for my truck. I need both 7 and 4 pin connectors. 2014 Toyota 4 runnner

asked by: Karol

0

Expert Reply:

To replace the factory 7-Way on your 2014 Toyota 4Runner with a 7- and 4-Way connector all you will need is # HM40950. The factory harness will plug into the back of this connector. It is the closest match to the OEM connector that we have available. I have included a link to a video review for you.

expert reply by: Michael H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To add a hitch to your 2024 Jeep Grand Cherokee L, I recommend the Draw-Tite item #DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. This is a class III hitch with a 2" receiver. It has a 7,500 lbs towing capacity…

view full answer...

Answer 4

I was able to look up your previous purchase and it looks like you've ordered 2 different chain kits from us. I'll list them below along with the tire sizes they fit. If you let me know the year/make/model of your vehicle as well as the tire…

view full answer...

Answer 5

For your 2022 Toyota 4Runner with the factory tow package, the best brake controller is the Tow-Pro Elite from Redarc, and to mount it all you'll need is the correct wiring adapter: - Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR -…

view full answer...

Answer 6

For your RV built on the 2003 Ford E-450 chassis, I recommend looking at the Curt Adjustable Width Trailer Hitch Receiver #C13702. This is a universal, adjustable trailer hitch designed specifically for use on RVs. It can be bolted to the vehicle…

view full answer...

Answer 7

We have the Furrion Chill AC Unit part #FR42PV that was designed to replace the Coleman units like what you have which would be a really great option. This blows the coldest air and is the most quiet as well so it's a really great choice.

view full answer...

Answer 8

It could be possible that your 2012 Boat trailer is wired with a wishbone style harness. Similar to Item #A25W2GWB. This type of harness just allows the installer to run each side separate rather than splicing and running extra wires across the…

view full answer...

Answer 9

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

view full answer...

Answer 10

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 11

I definitely recommend using a weight distribution hitch with sway control with your 2021 Honda Pilot towing a 3,500 lb trailer. The general rule is that if the trailer weight is more than 50 percent of your vehicle weight, you want a weight…

view full answer...

Replacing Factory 7-Way with a 7- and 4-Way Connector on a 2014 Toyota 4Runnner

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching