Where Does Trailer Wiring Plug Into on a 2008 Subaru Forester 2.5XT
Question:
I just received your C55370 model and planning to install in my Subaru Forester 2008 2.5XT When installign I went over all the vidoes of Subarues, indicating the manufacturers connector could be find in the cargo space behind paneling on either driver or passenger side or more towards the front. I removed all paneling in my cargo space see pictures, but no manufacturers connector to be found... Can you tell me if this has been installed on a Subaru Forester 2008 2.5XT Turbo model before. If so, where do you think I can find the manufacturers connector? Your help is greatly appreciated
asked by: Raymond
Expert Reply:
On the 2008 Subaru Forester the connector you are looking for should be rearward of a long junction box with wires going in and out of it on the driver's side based on your pictures. It is potentially concealed by being wrapped up in electrical tape. Follow the wiring coming out of that box and you should eventually come across the connector. But it may not be easily visible and you may need to cut away tape or protective loom to get to it. The wiring branches off and the connector usually takes the lower path.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Trailer Wiring
- Shop: Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Vehicle Tow Bar Wiring
- Video: Best 2009 Subaru Forester Trailer Wiring Options
- Video: Trailer Wiring Harness Installation - 2007 Subaru Forester
- Video: Trailer Hitch Installation - 2008 Subaru Forester - Curt
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: Rooftop Cargo Carriers
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Search Results: dust cap
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Video: Choosing the Right Brake Controller
- Search Results: 68149
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: 25580
- Video: Tow Ready 4-Pole Mounting Bracket Installation
on Custom Fit Vehicle Wiring
