Trailer Hitch and Wiring for a 2013 Nissan Pathfinder without Factory Tow Package

Question

Question:

I have a 2013 Nissan parhfinder SV without tow package. What do I need to fully outfit with a 2inch hitch I prefer bolt on unit no welding.

asked by: Mark D

0

Expert Reply:

I will be happy to help you out. First, for a 2 inch trailer hitch for your 2013 Nissan Pathfinder you can use Draw-Tite trailer hitch # 76031. There is no drilling or welding required to install this hitch. I have included a link to the instructions with more details on the installation procedure.

If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not have the right rise or drop to tow the trailer level, use the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

And to add a trailer connector you can use the new harness # 118670 since your Pathfinder does not have the factory tow package. this will provide a 4-Way flat trailer connector at the rear of the vehicle.

expert reply by: Michael H

0

Answer 1

Given the choice between the Draw-Tite and the Curt receiver hitch for your 2013 Pathfinder, I'd lean more toward the Draw-Tite hitch for the following reasons: -The Draw-Tite #76031 has a capacity that's higher than the other hitch.…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

We have anti-rattle hitch locks like the part #63232 which are a great fit for hollow, 2-inch hitch accessories like what you'd have most likely on your 2016 Nissan Pathfinder. But it really depends on the hitch cover you have. Some have shanks…

view full answer...

Answer 4

According to my research, the 2013 Pathfinder should already have a 7-way trailer connector at the rear. If not, look under the vehicle for the trailer wiring. There should be a wire harness with a US car connector on the end, like what's shown…

view full answer...

Answer 5

All 2013 Nissan Pathfinders came pre-wired for a tow package, so we know your Pathfinder at least has something. If your Pathfinder came with the tow package option from the dealer, then you would have a trailer hitch and trailer wiring at the back…

view full answer...

Answer 6

You will need to look to see if the vehicle has a second higher capacity when used with a weight distribution system. Typically there will be two sets of capacities. Weight carrying (which will be lower) and weight distribution (which will be…

view full answer...

Answer 7

Some hitches that fit the 2014 Nissan Pathfinder will also fit the 2018 model year, but not all variants. If you refer to the two hitch pages I linked, one for each model year Pathfinder, you will indeed find some hitches that are common fits. For…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Trailer Hitch and Wiring for a 2013 Nissan Pathfinder without Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching