7-Way to 6-Way Recommendation for Flat Towing a Jeep Wrangler

Question

Question:

I need the wiring diagram for a 7pin plug to a 6 pin on 2011jeep wrangler unlimited sport. Winnebago Motorhome to this jeep. Can you help?

asked by: Ted E

0

Expert Reply:

It sounds like you are looking for an umbilical wiring adapter to go from a 7-way blade on your RV to a 6-way round on your vehicle that you are flat towing. For that you would want the part # HM47053.

expert reply by: Jameson C

0

Answer 1

The Hopkins 7-Way to 6-Pole adapter #HM47053 only comes with a center pole brake configuration but we have #HM47083 that is set up for center pin 12 volt power. But it is 3 feet long. Another option is to use #BX88206 and just take apart the…

view full answer...

Answer 2

They do not make a 7-way to 6-way adapter like the part #HM47053 that has the center pin as the 12 volt like you are wanting so your best option will be to swap the wires on the 6-way on the front of your Jeep so that you can use this one.

view full answer...

Answer 3

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Gladly! The difference between the Blue Ox Patriot 3 Radio Frequency, Portable Braking System BRK2019 and the Blue Ox Patriot Radio Frequency, Portable Braking System #BLU37TR is that the Blue Ox Patriot 3 RBRK2019 is older, no longer available, and…

view full answer...

Answer 7

Hello John. The #C96JR tail light kit for the 2023 Jeep Gladiator will indeed work with a Brake Buddy brake System Such as part #HM39524. So, if you plan to use a portable brake system, that is definitely what I recommend, and you do not need to get…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

If the lift motor will no longer operate with the controller but does when you apply direct 12 volt power then that tells me there is an issues with the control board. The only way to replace the control board on the Fan-Tastic Vent Roof Vent part…

view full answer...

Answer 10

Hey Ken, yes the Blue Ox base plate kit part #BLU85CR does have a tab for connecting to safety chains.

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

I've dealt with this issue in the past and Roadmaster stated that there shouldn't be more than 1/8" gap, otherwise you'll get two much play and can start to get friction. Since you're right at 1/8" with the #RM-035-1…

view full answer...

7-Way to 6-Way Recommendation for Flat Towing a Jeep Wrangler

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching