bing tracking image
Q & A Icon

Travel Trailer Tire Wear Troubleshooting  

Question:

I have a 2012 28ft ultralite travel trailer that has been towed a total of 5000 miles. one of the tires curb side on the rear axle has a bad case of ramping wear with the leading edge of each lug of tread being normal height while the trailing edge of each lug is almost down to wear indicator bar. while the other side of the same axle has also experienced the ramping it is not as pronounced. My hitch was set up by the dealer but I have noticed that the trailer seems to be in a nose down attitude by about 4-5 inches when hooked to my tow vehicle could this cause the wear I described?

0

Expert Reply:

Having a trailer not being perfectly level while towing can cause uneven tire wear especially if the trailer is a tandem axle trailer.

What you will want to do is check out the help article I attached that details how to pick out the correct rise/drop ball mount so that you can tow your trailer level.

Many things can cause uneven tire wear, including a bent axle, an overloaded trailer and worn or broken suspension components.

A trailer axle should be slightly arched, with the high spot in the center of the trailer and the spindles on either end being slightly lower. When the trailer is loaded the arch will flatten, placing the trailer tire treads in full contact with the road surface. A damaged or overloaded axle may place the inside edge of the tires in greater contact with the road, rather than the whole tread. A worn or damaged suspension component might cause the trailer to track incorrectly, which would also affect the alignment of the wheels and cause uneven wear.

Make sure that your trailer load remains equal or less than the capacity of the lowest rated component. If you have a 3000 lb axle, but your tires are rated at 1200 lbs apiece your trailer capacity will only be 600 lbs less than the axle capacity. Any towing system is only as strong as its weakest component.

Closely examine your axle and suspension components, and be aware of the load you are placing on your trailer to ensure it is not being overloaded. Once any broken, bent or worn components are repaired or replaced and the trailer capacity and the weight of the load is known and not exceeded, you should have no more problems with uneven tire wear. You will also want to ensure that your that your tires are kept inflated to the maximum pressure listed on the tire sidewall.

expert reply by:
0
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>

^

Recently Viewed Products

About Us
photos and videos
1,056,204
Original Photos & Videos

Produced to make sure you know what you are getting and you get exactly what you need.

installations
35,570
Installations Completed

To make sure products work and fit the way they are supposed to.

etrailer call center
2,476,511
Phone Calls & Emails Answered

1,125,924 phone calls and 1,350,587 emails to help find the right solution.

etrailer training
400+
Average Hours of Product Training

We get to know our products firsthand so experts can better help you.

etrailer service
78
Years of Quality Customer Service

Assisting our neighbors and customers, face to face at the counter.

etrailer experts
193,357
Pages of Expert Information

Created to make sure you have all the answers to your questions, from real experts.