Recommended Spare Tire Cover For ST225/75-15 Tire Mounted On Flatbed Trailer

Question

Question:

Flatbed trailer spare size ST225/75x15 29max diameter side mounted and above deck needing enough coverage over back of spare for best protection and wind resist fit. Can you suggest best cover?

asked by: Bob M

0

Expert Reply:

For tire size 225/75-15, the diameter is 28.4 inches. I recommend a spare tire cover like part # 052963753479.

All of the spare tire covers we offer have an elastic hem at the back that secures the cover to the tire. I have attached a photo that shows the elastic seam on the back of the cover you can check out.

expert reply by: Jeffrey L

0

click to enlarge

Answer 1

CE Smith Spare Tire Cover #CE27440 is designed to be slipped over a mounted spare tire. It does not require you to unbolt the spare from the trailer or tire carrier. If you refer to the linked photo you'll see how the elastic hem snugs the…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The Brophy Rigid Mount Spare Tire Carrier #BR56VR will allow you to carry a spare tire with Wheel #TA56FR on your 4" RV Bumper. I have included an image below of a similar setup so you can see how it fits.

view full answer...

Answer 4

You absolute can install a brake controller in a 2015 Honda Odyssey, but it will involve splicing. This is not difficult at all, so I don't know why your installer wasn't willing. We do this all the time and create videos so you can…

view full answer...

Answer 5

The tire size you referenced, 235/85R16, has an overall diameter when fully inflated of about 31-1/2-inches. Therefore the cover you referenced, part #052963753479 from Classic Accessories, would be too tight a fit. A better option is the Classic…

view full answer...

Answer 6

The Buyers Products Stake Pocket Spare Tire Carrier #3375201012 fits most standard 3-1/2 in. and 3-3/4 in. stake pockets. Yours being 3-91/6 inches wide would work perfectly with this kit. There isn't a specified weight capacity for this as the…

view full answer...

Answer 7

A 235/75-15 tire like what you have would measure right at 29 inches in diameter. So for that we have the CE Smith cover part #CE27440 which would fit and work well for an all black cover. I also attached a link to a page that has all of the spare…

view full answer...

Answer 8

For a cover designed to fit over standard 4-way connectors we have the #C58200. Another very helpful idea will be to put dielectic grease on the pins of your 4-way. This will actually be your best way to fight the corrosion. For that you would want…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hi Bruce, To lift your trailer we'll first need to check of the suspension and see if you have torsion axles or a leaf spring suspension. If you have torsion axles then I'll need to see the axle tag in order to determine what you have so I…

view full answer...

Answer 11

Great question, Mike! The Brophy Rigid Mount Spare Tire Mount #BR56VR doesn't actually have a weight rating because it's been rated for tires that fit on up to 17-1/2" wheels. So this will be able to handle the weight of your 16"…

view full answer...

Recommended Spare Tire Cover For ST225/75-15 Tire Mounted On Flatbed Trailer

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching