Are the Hi-Spec Aluminum S5 Series Trailer Wheels Painted, Coated, or Polished

Question

Question:

Are these wheels polished and clear coated or are they painted silver?

asked by: Rudy

0

Expert Reply:

The wheels in trailer tire and wheel combo # AM32001HWTB are aluminum so they are neither painted nor clear coated but they are polished.

The wheel itself is # AM22323HWTB. I have linked a video on the wheel only to give you a better idea of its features.

expert reply by: Michael H

0

Answer 1

The trailer wheel #AM22323HWTB that you referenced does not come with a valve stem. You'd need to order one separately with one like the part #AM20903. Then for a chrome center cap you'd want the part #319EZ and for lug nuts the part…

view full answer...

Answer 2

Most people run a standard style center cap with the HWT Wheel part #AM22323HWTB you referenced like in the picture I attached. For a center cap that would fit that wheel the part #319EZ would be a great option.

view full answer...

Answer 3

I spoke to the trailer specialist at Ranger Boats and the trailer supplied with their RT178 bass boat usually is fitted with 13-inch wheels that have the popular 5-on-4-1/2 wheel bolt pattern and a wheel pilot hole diameter of 3.19-inches as with…

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Are the Hi-Spec Aluminum S5 Series Trailer Wheels Painted, Coated, or Polished

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching