Install Instructions and Owners Manual for the Roadmaster Tow Dolly part # RM-2000-1

Question

Question:

Hello, how do I aquire an owners and service manual, for the tow dolly, above? Thank you

asked by: Jim A

1

Helpful Expert Reply:

I attached the install instructions and owners manual for the Roadmaster Tow Dolly part # RM-2050-1 that you referenced. They are linked on this page under the words, "Featured Help Information."

expert reply by: Jameson C

1

Answer 1

The stabilizer bar, part #RM-921006, is 42 inches end to end and 40 inches from the bolt holes center on center.

view full answer...

Answer 2

I checked with Roadmaster and the overall length of the Replacement Stabilizer Bar #RM-B001225 is 35-3/4 inches. This is designed as a replacement part for the tow dolly part #RM-2050-1 which wouldn't require measuring to determine the fit of. So…

view full answer...

Answer 3

I checked with Roadmaster and the overall length of the Replacement Stabilizer Bar #RM-B001225 overall is 35-3/4 inches.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. I really like the etrailer hitch item #e27KR because it installs behind your rear bumper cover and…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…

view full answer...

Answer 11

Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Install Instructions and Owners Manual for the Roadmaster Tow Dolly part # RM-2000-1

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching