Need OEM Rectangular Socket to 7 Way Adapter for 2001 Ford F-250 Super Duty

Question

Question:

I need an oem rectangular to 7 way blade adapter like this for an 01 ford f250 superduty, can you help?

asked by: Bill

0

Expert Reply:

For your 2001 Ford F-250 Super Duty you will need the Ford OEM Tow Package Wiring Harness, # 118243. This harness plugs directly into the standard OEM connector shown in your picture and fuses and relays are included.

I have attached an installation video for you.

expert reply by: Leah S

0

click to enlarge

Answer 1

I was able to find an image which shows the Pack'Em Rack #PK-6-OP1 mounted on an outside of a utility trailer in a similar fashion to how you are wanting yours mounted. You can see they mounted the uprights to supports they have to for the…

view full answer...

Answer 2

I attached two pictures that shows what the harness on your 2001 Dodge Ram 2500 will look that you'll plug the #C57300 into. The first picture shows the connector without the cap on it, and the second shows it with the cap removed.

view full answer...

Answer 3

The B&W Gooseneck Hitch #BWGNRK1394 that you referenced is a confirmed fit for your 2001 Dodge Ram 2500 with 8-foot bed. For a wiring harness you can use #HM42137 from Hopkins.

view full answer...

Answer 4

The problem with using 7-way wiring for a headache rack is that there isn't a dedicated stoplight circuit so if the rack has a third brake light you won't find the correct circuit at this harness. The turn signals, running lights, and reverse…

view full answer...

Answer 5

The Pack'Em Rack for Open Utility Trailers part #PK-6-OP1 does not come with any of the added accessories shown on the product page (i.e. cooler, leaf blower, lawn trimmer). The accessories are included in the photo to give customers a better…

view full answer...

Answer 6

Yes, the Curt Universal Fifth Wheel Base Rails #C16200 are the correct rails for your 2002 Dodge Ram 3500. These rails are the industry standard rails that will fit your RBW 5th wheel hitch that is designed to fit the industry standard rails. I do…

view full answer...

Answer 7

Actually, the #HM42137 that you looked at is exactly what you need. This harness will plug inline at the connection where the 7-way on your back bumper plugs into the truck's tow package harness, right behind the connector itself as shown in the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Need OEM Rectangular Socket to 7 Way Adapter for 2001 Ford F-250 Super Duty

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching