Are the Measurements of Double-Eye Springs Loaded or Unloaded

Question

Question:

on your double eye springs is the arch height measurement of a loaded or unloaded spring? thank you for your time!

asked by: Warren C

1

Helpful Expert Reply:

All the measurements we provide for double-eye springs like the double-eye # e54SR are when they are unloaded.

I also included a diagram showing the dimensions needed when replacing double-eye springs, informative article and video review for you.

expert reply by: Chris B

1

click to enlarge

Answer 1

The MORryde Suspension Upgrade Kit #MR58ZR uses the Flange Lock Nut #006-092-01.

view full answer...

Answer 2

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 3

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 4

If the U-bolts are 9/16 inch diameter, the torque specs should be between 65 to 95 foot lbs. If the U-bolts are 3/8 inch diameter, the torque should be between 30 and 50 foot lbs.

view full answer...

Answer 5

The correct torque spec for trailer suspension u-bolts will depend on the the diameter of the bolt. You will want to use the following depending on bolt size: 1/2" bolts: 45 ft/lbs - 70 ft/lbs 9/16" bolts: 65 ft/lbs - 95 ft/lbs 5/8"…

view full answer...

Answer 6

You will need a lock nut, though the ones you mentioned are not, we do have the correct lock nut for the Step Bolt For Double Eye Springs - 9/16" Diameter - Plain - 3" Long #ABS34FR: - Fastenal Lock Nut - Zinc Plated Steel - 7/16"-20…

view full answer...

Answer 7

I pulled one of the U-bolts we offer from our warehouse and took a quick measurement for you. The distance from the inside of the inside arced area of the U-bolt, part #CE23003 to the threads on the leg is 4-3/4 inches. The threaded portion is 2…

view full answer...

Answer 8

The torque of U-bolts for 3,500 lb axles such as the 95" long Dexter Trailer Axle Beam #7359765 or 89" long Dexter Trailer Axle Beam #T3584F-EZ-8974 depends on the diameter of the U-bolts. I have cut out a part of our help article on…

view full answer...

Answer 9

Every 3,500lb Dexter axle we sell has a diameter of 2-3/8" and typically uses a 5-1/2" U-bolt, such as U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts #APUBR-1. You may have a 5,200lb Dexter axle, which has…

view full answer...

Answer 10

The MORryde CRE3000 part #MR27ZR that you referenced was designed for 35 inch wheelbases like you have so it's for sure going to work. Since you have the 3-1/8 inch shackle length currently the correct shackle kit you'd need is the part…

view full answer...

Answer 11

The MORryde CRE3000 Rubber Equalizers are a great upgraded equalizer option for any trailer. They are cushioned so they will do a great job of absorbing road shock and providing a smoother ride. In order to choose the correct ones you'll need to…

view full answer...

Answer 12

There is a complete equalizer upgrade kit for your Dexter 13-122 equalizer, which measures 7-3/4" long and 2-7/8" tall but you're right it is not the MORryde. Instead, the correct upgrade kit is also from Dexter, the E-Z Flex: - Dexter…

view full answer...

Are the Measurements of Double-Eye Springs Loaded or Unloaded

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching