Disc Brake Kit for 2010 Magic Tilt Tandem Axle Trailer
Question:
Hi, I was looking at K2HR35DS for my 2010 Magic Tilt TXP2460B2 F78X14C tandem trailer brake swap-out but wasnt sure what size bearings kit Ill need. Wheels are 5 on 4-1/2. A local shop suggested I stick with UFP brakes and suggested Kodiak brake parts will not fit. Any comments?
asked by: Geddy
Expert Reply:
The Kodiak Disc Brake Kit # K2HR35DS that you referenced will fit a # 84 spindle and requires inner bearing # L68149 and outer bearing # L44649. The kit includes the races but does NOT include the bearings or seal, but we offer these separately as part # BK2-100. Any new brake kit must use the same bearings as those on the trailer.
We do not carry UFP brand brakes so I cannot offer comment about their suitability, but as long as your trailer uses the same bearings and bolt pattern as the Kodiak kit, and as long as its axle capacity matches this 3500-lb-rated disc brake kit, it should work just fine. This brake kit works with wheels of 13-inches and up and requires a 4-bolt brake flange. Please refer to the linked video for more on this Kodiak kit and to the linked article for information about adding disc brakes to a trailer.
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet and Stainless - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K
- Search Results: a60
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Video: Kodiak E-Z Lube Disc Brakes Installation
- Video: Review of Dexter Axle Brake Actuator - Surge Brake Actuator with Reverse Lockout - DX56FR
- Video: Review of Kodiak Trailer Brakes - 10 Inch Hub and Rotor Disc Brakes - KOD67FR
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 7'
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Brass Flares - 1/8" ID - 19'
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 5' Long
- Search Results: 3 16 brake hose
- Search Results: bh~3mfs~20
- Search Results: brake hose
- Shop: DeeMaxx Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs
- Shop: DeeMaxx Hydraulic Brake Line - Rubber - 3/16" Brass Male Inverted Flares - 21' 8" Long
- Article: Trailer Wiring Diagrams
- Search Results: bearing buddy
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Search Results: trailer brakes
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Search Results: brake controller
- Shop: Brake Controller
- Shop: Suspension Enhancement
- Video: DeeMaxx Disc Brake Kit Review
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778