How to Use Timbren Rear Suspension Kit # TFRTT350F in 2006 Ford F-250 with 2-Inch Suspension Lift

Question

Question:

Does TFRTT350F have any extension adapters for f250 that has been raised about 2 inches in the rear to close the gap between mounting position and axel? Respectfully.

asked by: Jack

0

Expert Reply:

Timbren offers 1-inch spacers # A25723-90AH00 that can be used when their rear axle suspension kits are to be installed in a lifted truck. You'll need 2 spacers per side in your application and to locally source 2-inch longer bolts. Please refer to the linked video that shows a suspension kit being installed in a lifted truck.

expert reply by: Adam R

0

Answer 1

To add a 1" spacer #A25723-90AH00 to the Timbren Active Off-Road Bumpstops #TABSOSR you were looking at for your 2014 Toyota Tundra you will need to purchase two grade 5 or 8 3/8" x 2-1/2" F/T UNC bolts from your local hardware store.…

view full answer...

Answer 2

This is extremely rare and I can only imagine this happening if the springs were incorrectly installed, or were in the wrong location, under an extremely heavy load, or possibly having the wrong system installed. Per the instructions, there should…

view full answer...

Answer 3

The Timbren Rear Suspension Enhancement System, #TFR350SDF, is confirmed to fit for a 2011 Ford F-350 Super Duty truck. The offset design Aeon spring will replace the OEM stop and will align with the rear axle. I have attached an installation video…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 11

The best air bag kit for your 2022 Ford F-350 that has a single rear wheel axle is the part #F95FV which has the 5,000 lb capacity you are wanting. Firestone bags are superior Air Lift bags. The ply rating of the rubber is higher, the attachment to…

view full answer...

Answer 12

We do - for your 2023 Ford F-350 you'll want the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect #TL89CR.

view full answer...

How to Use Timbren Rear Suspension Kit # TFRTT350F in 2006 Ford F-250 with 2-Inch Suspension Lift

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching