Rhino-Rack Roof Rack Fits on 2014 Audi Q7 with Panoramic Sunroof

Question

Question:

Rhino-Rack Vortex Aero Crossbars - Aluminum - 49inch Long - Qty 2 Rhino-Rack SRB Legs for Vortex Aero Crossbars - Flush Factory Side Rails - Qty 4 I have a 2014 Audi Q7, so will this work with the panoramic sunroof?

asked by: Jeff

0

Expert Reply:

The Rhino-Rack Vortex Aero roof rack system that fits your 2014 Audi Q7 fits all versions of the car so long as it has the flush mounted rails that run front to back. Your panoramic sunroof is not a problem with this crossbar rack system.

So all you need to do is order parts # RRVA126B-2 and # RRSX027.

expert reply by: Adam R

0

Answer 1

The Rhino-Rack Vortex rack system for your 2015 Audi Q7 that consists of parts #RRVA126B-2 and #RRSX027 features black 49-inch aero crossbars. If you prefer you can substitute the longer 59-inch silver Vortex bars, part #RRVA150S-2, but note that…

view full answer...

Answer 2

The Kuat Grip Ski and Snowboard Carrier #GRR6B is the most low profile carrier we have. The main unit is only 2-3/4" tall. Using the T-Channel Mount Kit #GRDMK with the short 9/16" pads it will give you a height of 3-5/16" from the top…

view full answer...

Answer 3

For your 2015 Audi Q7, I recommend the Rhino-Rack Vortex Aero Crossbars #RRVA126B-2 and SRB Legs for Vortex Aero Crossbars #RRSX027. The aerodynamic design of these crossbars helps to reduce wind noise and drag. This is our most popular roof rack for…

view full answer...

Answer 4

About 3-1/2 - 4" will be added to the height of your 2013 Audi Q7's roof when using Thule WingBar Evo Crossbars Black - 47" #TH711220, Feet #TH710601, and Fit Kit #TH186025. This system attaches to your factory flush rails and provides…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's the…

view full answer...

Rhino-Rack Roof Rack Fits on 2014 Audi Q7 with Panoramic Sunroof

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching