Best Trailer Hitch Recommendation for a 2015 Kia Soul
Question:
Will a curt # 11110 fit a my 2015 Kia Soul or do I send it back and order curt # c11385. I owned a 2013 kia then purchased 2015 kia meantime at the same time I was ordering hitch, bad timing on my part. thanks
asked by: Fred F
Expert Reply:
The newest Kia Soul the hitch part # C11110 will fit is a 2013 model. For your 2015 Soul you would want the part # 24915 that you also referenced.
If you plan on doing any towing you will also need wiring, # C56220.
For a ball mount you can use # C45521, pin and clip # PC2, and a properly sized ball. For a 1-7/8 inch ball use # A-80 and for a 2 inch ball use # A-82.
If you plan on using the hitch for a bike rack or cargo carrier you will need to use stabilization strap # 18050 for Curt's warranty requirements. Also make sure that the accessory is rated for use in a Class I hitch. For a bike rack you are limited to 2 bikes on a Class I trailer hitch.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 3 Inch
- Rise - 2 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Motorhome Side Components For The Brake Buddy Stealth Supplemental Braking System
- Article: How Much Solar Power Do I Need For My RV?
- Q&A: How to Find Key Number for Kuat Bike Rack
- Q&A: Parts Needed to Flat Tow a 2012 GMC Terrain Behind a Class C Motor Home
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Availability of Trailer Hitch Receiver for a 2014 Kia Soul
- Q&A: Is EcoHitch Hidden Trailer Hitch 306-X7326 For 2014 Kia Soul Compatible With Platform Bike Rack?
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Trailer Hitch Receiver Sizes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: Best Way To Attach Trailer Plug Bracket To A Trailer Hitch Without A Pre Welded Bracket