Do Trailer Dolly Hitch Balls Have to Match the Ball Size of Coupler  

You can't get a larger ball for the Rack'Em Trailer Dolly part #RA20, but the good news is that you don't need one to use it with a trailer trailer that has a coupler designed for a 2-5/16 inch hitch ball. The reason for this…

If your trailer has a 2-inch ball coupler you can still use the 1-7/8-inch Rack'Em Trailer Dolly #RA20 to move it to and from your storage position. While it would not be appropriate to tow with different sizes of ball and coupler use of a…

A standard trailer dolly like #RA20 is not directly compatible with the Lock N Roll hitch system. There is not a dolly designed to work with that system, however if you were to use a similar system with the ability to attach to a hitch ball, then a…

Yes, you can use a dolly like the #RA20 with a smaller hitch ball to move around a trailer that has a larger hitch ball. The trailer's tongue weight will keep the trailer on the ball and it will be totally fine and safe.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Yes, the Dexter E-Z Flex Equalizer #K71-655-00 will indeed work with the standard 1-3/4" wide double eye leaf springs.

We do offer a few of the 7-3/4" long equalizers with 3 9/16" holes. Unfortunately, the standard equalizers in this size like the #TREQE1 are not greaseable. There is the Dexter E-Z Flex Equalizer #K71-655-00 which is a 7-3/4" long…