How to Choose 6-on-5-1/2 Hub/Drum Assemblies and Brakes for an Axle
Question:
I have two Moble home axles and I need to know what parts I need to change to 6 lug hubs with brake drums
asked by: Dean D
Expert Reply:
Replacement hubs are selected based on the bearing set used in the originals. The linked picture shows you the typical location and appearance of bearing, race and seal part numbers, but if you cannot find those you can measure the spindles with a precision caliper to the nearest thousandth of an inch (1.123). The locations to measure are shown also.
I included a link to our main page for all 6-on-5-1/2 bolt pattern hub/drum assemblies. These come with the appropriate bearings, races, seal and grease cap. These come in two sizes, 12 x 2 and 10 x 2-1/4. For example, Dexter part # 8-201-5UC3 is a 12 x 2 and # 84656UC3 is a 10 x 2-1/4 size. Once you select hubs to fit your spindles you can then use the other link provided to select electric or hydraulic brake assemblies of the same size. If you already have the brakes then you can choose matching diameter hubs.
Mobile home axles are intended for a single use, meaning they are good for one trip to the MH's permanent destination. They are not suitable for a second trip or for ongoing use on a trailer.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles - 12" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- LM67048
- For 5200 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - 15123
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing 15123
- Race 15245
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Search Results: l44610
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Trailer Spindle Nut 1"
- Shop: Bearing Kit, 15123/25580 Bearings, GS-2125DL Seal
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - F001518 Review
- Shop: Grease Cap - 1.988" Outer Diameter - Drive In
- Shop: D Washer for EZ Lube Spindles
- Shop: LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Q&A: How to Find Correct Trailer Hub
- Video: Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3 Review
- Video: Review of Dexter Axle Trailer Hubs and Drums - Hub with Integrated Drum - 84656UC3-EZ
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2
- Q&A: Determining Correct Replacement Bearings and Seals for 6,000 Pound Axles
- Q&A: What is the Best Grease for Trailer Bearings
- Search Results: 25580
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: l44649
- Shop: Trailer Wiring
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Shop: Brake Controller
- Article: Trailer Tire Sizing
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Search Results: l68149
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Video: etrailer Trailer Idler Hub Assembly Installation
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: bearing buddy