Is It Possible to Move Square Axles Below Leaf Springs
Question:
I see in the drawing that its for a round or tube axle. I have a square axle and want to move leaf springs to the top. You have any kits for this
asked by: Brian N
Expert Reply:
Based on the picture you submitted that shows a square axle welded to a mount which is then welded to a leaf spring you would need to have someone qualified use a cutting torch to remove the mount from the spring so that you could then use a u-bolt style of mounting kit to attach the spring on top of the axle. To do this you will need to know the dimensions of the axle.
We have kits for square axles that range from 1-1/2 inch square axles up to 2 inch axles. Once you determine the size axle you have you will need to follow the link I attached, select your axle dimensions from the filters and the correct size u-bolts will be listed. The correct size mounting plate will be listed on the product page for the u-bolts.
We currently only offer spring seats for round axles so you may have to fabricate something for that. Using a qualified fabricator with experience with trailer suspension would be your best route.
Product Page this Question was Asked From
Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Tandem Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 5-7/16" Center
- Video: Redline Trailer Suspension - Leaf Spring Suspension - APT4 Review
- Q&A: How to Determine where to Place Axles on a 17 Foot Car Trailer or Any Trailer
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: Trailer Square U-Bolts (Qty 2), 2-3/8" x 5-1/4" x 3/8"
- Shop: Replacement U-Bolt for 2" Wide, Square Axles - 1/2" Diameter - Zinc Plated
- Shop: CE Smith U-Bolt - Zinc-Plated Steel - 4" Long x 2-1/8" Wide x 7/16" Diameter - Qty 1
- Q&A: Correct Hanger Spacing for the Tandem-Axle Trailer Hanger Kit Part # APT4
- Q&A: Distance Between Hangers with 26 Inch Leaf Springs
- Q&A: Correct Hanger Spacing For The APT4 Kit Using 25-1/8 Long Leaf Springs
- Q&A: How To Find Hanger Spacing When Using Tandem-Axle Trailer Hanger Kit APT4
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Installing Leaf Springs on Single Axle Trailer
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Search Results: battery charge controller
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Video: Review of Bright Way Trailer Breakaway Kit - 3802349
- Video: Timbren Trailer Suspension - Leaf Spring Suspension - TTRA1032 Review
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-385-00 Review
- Shop: Replacement 12V 5 Ah Battery for Bright Way Trailer Breakaway Kits
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Side Load
- Q&A: Is There A Trailer Equalizer 7-3/4 Long Thats Taller Than 4
- Shop: Vehicle Tow Bar Brake System
- Search Results: 44649
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: 68149