Recommended Trailer Hitch for a 2013 Honda Odyssey Pulling Fully Loaded Trailer with a UTV
Question:
I have a 2013 Honda Odyssey that Im planning to haul a trailer with. Trailer weight is around 1,200lbs and my UTV is around another 1,400lbs. This doesnt include any gear that I may be carrying. Total package approximately 3,000lbs fully loaded. Do you have a suggestion for which trailer hitch would best suit my needs.
asked by: Jeff
Expert Reply:
The trailer hitch I recommend is the Draw-Tite Class III # 75270 and it will have a maximum tongue weight of 350 pounds and gross trailer weight of 3,500 pounds. The wiring you need is # 118521, and ball mount kit I recommend is # EBMK4 which will include an interchangeable ball set, ball mount with 2-3/4 inch rise or 4-inch drop, pin and clip and a storage bag.
With that said though, you will not want to exceed the 350 pound tongue weight because it could bend the hitch and potentially cause damage to your Odyssey. I included a great article about determining tongue weight for you too.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
I included a installation video and helpful articles for you too.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Hitch for VelociRAX 5 Bike Rack on 2012 Honda Odyssey
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Comparison Between Draw-Tite 76025 and EcoHitch 306-X7253 for 2015 Honda Odyssey
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Transmission Cooler
- Q&A: Choosing OEM or Aftermarket 5th Wheel Puck System for 2021 Ford F-250
- Q&A: How To Install a 7-Way Trailer Connector On a 2016 Honda Odyssey
- Q&A: Honda Odyssey Custom Built Class III Round Tube Trailer Hitch Bolt Sizes
- Q&A: Solution for Keeping RV Furrion Refrigerator Doors Closed when Travelling