Is There a Replacement Hub for My Mobile Home Axle
Question:
I have a car type trailer with house trailer hubs on 7000 lb axles. I would like to convert these hubs to regular type hubs. Do you offer a product for this such as a house trailer axle hub conversion kit Thanks,
asked by: George B
Expert Reply:
In order to determine which hub will fit the spindle, you will either need the bearing numbers from the bearings from that spindle, or you can take some precise measurements on the different steps on the spindle using a dial caliper to get precise measurements.
Often times it is not possible to find replacement parts for mobile home axles as they are designed for one time use. In most cases replacement parts are simply not available. However, if you can find the bearing numbers or collect the measurements I can check to see if anything is available.
In order to see what measurements are needed check out the picture to the right. I also attached a link to a video below that shows a hub being removed and installed that you might find helpful.
Another option, if your bearings and seals are not standard sizes, is to replace the spindle on the trailer. You will need to consult a qualified trailer fabricator to have the old spindles removed and new spindles welded on. We carry the parts that would be needed.
Lets say that you need a 3,500 pound capacity axle. You would be able to use two of the 1,750 lbs. Spindles EZ Lube Spindle , item # TRU74FR, along with two of the Dexter Trailer Hubs and Drums, item # 84546UC3-EZ.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 2-13/16" (Qty 4)
- Shop: Trailer Wiring
- Search Results: trailer hitch wiring
- Search Results: rg03~140
- Shop: Multi-Plug T-One Connector Assembly for 7-Way & 4 Pole Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Flat Connectors
- Shop: Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle
- Q&A: Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and Tires
- Q&A: How To Convert Dexter Electric Drum Brakes to Hydraulic Disc Brakes on 10K Axle
- Shop: Flange Wheel Nut - 5/8"
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 5/8" x 3-1/8" (Qty 4)
- Search Results: 090737
- Search Results: 95188
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Search Results: trailer hub
- Search Results: trailer brakes
- Shop: Fluid Filters
- Search Results: 4 inch round led tail light
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Choosing the Right Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Brake Controller
- Video: Choosing the Right Brake Controller
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle