Solution for a Lost Swagman Hitch Pin Lock

Question

Question:

Hello i was woundering if you can send my a key for my Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks because i lost mine.

asked by: Antonio V

0

Expert Reply:

Swagman does not offer replacement keys for their bike racks as stand-alone items. You would need to replace the entire unit unfortunately. For that you would want the # S64029.

expert reply by: Jameson C

0

Answer 1

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy…

view full answer...

Answer 2

Yes, anytime you use a hitch extender or reducer like #HR26 you will lose about 1/3 of your hitches overall capacity. However, since you'll be towing a trailer that weighs between 4,500 to 5,000 lbs, the Brophy Hitch Reducer #HR26 will still…

view full answer...

Answer 3

We have one solution that will work well, but you'll need to have a 2-1/2 inch hitch installed on your tow vehicle. The Brophy hitch extender part #HR26 is a 7 inch extension with a capacity of 10,000 lbs so it would work well.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The main difference between the Swagman XC part #S64650 and the Swagman XTC part #S64670 is the wheel hoops. The wheel hoops that come with the XC can accommodate a bike with tires up 3.5" wide and spaced 51-1/2" apart on center…

view full answer...

Answer 6

The Swagman XC2 Bike Rack for 2 bikes, #S64650 is for a 1-1/4" hitch and rated for Class II but will fit a Class I hitch as long as it does not have the stopper/weld bead in the receiver. The Curt Trailer Hitch Receiver, #C11406 for the 2020…

view full answer...

Answer 7

Most likely yes, but here's how you find out for for sure. Measure from the center of the hitch pin hole on your 2007 Jeep Liberty Sport out to the furthest point out on the rear spare of the vehicle. If that dimension is less than 10-1/2 inches…

view full answer...

Answer 8

The Swagman XC2 Bike Rack for 2 bikes - 1-1/4" and 2" Hitches, #S64650 is a great option. This basic, lightweight 2-bike rack is perfect for the occasional rider with limited storage space in their garage. The wheel trays fold up, so it…

view full answer...

Answer 9

To be able to determine if you have enough clearance at the rear of your 2014 Durango for a bike carrier you can take a quick measurement. You will need a tape measure and a straight edge like a yardstick or a dowel. Place the straight edge…

view full answer...

Answer 10

The 2011 Honda Fit will use a Class I trailer hitch with a 1-1/4 inch receiver. I would certainly recommend the Swagman XC2 Wheel Mount Bike Rack, #S64650, which you referenced for your vehicle. A friend of mine has this rack on his Ford Focus and he…

view full answer...

Solution for a Lost Swagman Hitch Pin Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching