Hitch Hardware Recommendation for a 2000 Jeep Cherokee Installing Class III Hitch

Question

Question:

Im seeking the installation hardware bolts, nuts, washers, etc to install a class three hitch on my 2000 Jeep Cherokee. I already have the hitch, receiver and wiring but just need the hardware to install it. Thank you,

asked by: Josue S

0

Expert Reply:

The part number you need to get new installation hardware for the hitch you have for your 2000 Jeep Cherokee is # RHK. On the product page you will need to select the hitch manufacturer, enter the part number for the hitch and then hit add to cart.

expert reply by: Jameson C

0

Answer 1

The Draw Tite hitch part #76028 that you referenced comes with all of the needed hardware/bolts so you won't need to provide that to complete the install. But since you asked the bolt sizes are 1/2-13 x 1 3/4 (quantity 2), and M12-1.75 x…

view full answer...

Answer 2

The bolts that secure the hitch part #e98865 to the weld nuts of your 2017 Chevy Equinox are size M12-1.75 x 40mm.

view full answer...

Answer 3

There are a few different size bolts used to attach a trailer hitch to your 2015 Chevrolet Equinox. In order to make sure you get the correct ones, I would need to know exactly what trailer hitch you have as some do use different lengths for this…

view full answer...

Answer 4

Yes, your 2017 Chevrolet Equinox FWD can be flat towed with all 4 wheels on the ground. Do understand that you will need to run your Equinox for 5 minutes every time you stop for gas to properly lubricate your transmission and before towing. A…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

There are two options for a wiring harness for your 2020 Chevy Equinox depending on what model you have. If you have LED tail lights you will want the Roadmaster Smart Diode 7-Wire to 6-Wire Wiring Kit for Variable Voltage LED Tail Lights item…

view full answer...

Answer 7

We have just what you need. If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item…

view full answer...

Hitch Hardware Recommendation for a 2000 Jeep Cherokee Installing Class III Hitch

Product Page this Question was Asked From

Continue Researching